Chapter 10
Legal and non-fiction writing
Anyone who writes legal texts has to do two things at once. You have to persuade, and you have to be able to prove what you say: every fact with evidence, every legal view with a citation, every number with its source. Anyone who writes a non-fiction book knows the same burden in a milder form: readers trust that the sources are right.
Goethe Write takes the counting and the searching off your hands. The program keeps the numbers of your outline, the footnotes, the exhibits, the cross-references and the bibliography. You keep the thinking.
In this chapter you learn:
- what the type of work Law changes,
- the five tools Arguments, Case File and Chronology, Terms and Values, Clause Library and Literature,
- how to insert clauses and values,
- how footnotes, evidence, citations, cross-references and exhibits work,
- how the table of contents and the bibliography come about,
- and what a nonfiction book does differently from a novel or a legal brief.
Tip: The legal tools do not require the type of work Law. In any project you can switch them on under Project ▸ Tools… (see Chapter 2). The type of work merely switches them on for you.
The Law type of work
What changes
When you choose Project ▸ Type of Work ▸ Law, three things happen:
- The tool group Law switches on. Under Tools the sidebar shows the five legal tools.
- The head of the window shows the phases of legal work: Facts · Research · Outline · Brief · Revision · Output.
- The ribbon shows commands that do not exist otherwise: Legal Numbering, Renumber, Mark, Exhibit and Margin Numbers, plus Clause, Cite, Cross-Reference and Bibliography.
The type of work changes nothing in your texts. You can switch it at any time.
The phases of law
| Phase | What you see in the middle |
|---|---|
| Facts | The case file with the chronology: what happened when, and what each side asserts about it. |
| Research | Parties and material: contracts, judgments, letters. |
| Outline | The manuscript as a table with titles, status, words and synopses. |
| Brief | The text itself. |
| Revision | The Review: notices, comments, questions, changes and evidence in one place (Chapter 11). |
| Output | Export as PDF, Word and more formats (Chapter 14). |
A legal opinion, a law school paper or an article has the same phases. Only the name of the fourth phase, Brief, does not fit every kind of text. It is simply the name the program gives the manuscript in law.
Templates and sample
Four templates prepare legal writing: Complaint, Legal Opinion, Law School Paper and Journal Article (see Chapter 2). What a fully filled-in brief looks like, Help ▸ Sample: Brief shows. All the tools of this chapter are in use there: the statement of defence in the case "Kessler ./. Brandt" has footnotes, exhibits, values, an argument map, a chronology, evidence, a clause, comments and tracked changes. (The sample is written in German.)
The heading styles in law
In a novel the ribbon calls the paragraph styles Chapter, Subchapter and Section. In law they are called what they are: Heading 1 to Heading 6. They correspond to the levels of the outline. You set the styles with ⌥⌘1 to ⌥⌘6; ⌥⌘0 is Body Text, ⌥⌘7 the Block Quote.
What you set as a heading appears on the left in the sidebar below its text. A click jumps there. With the mouse you move a whole section, together with its comments, evidence and tracked changes.
Legal numbering
German legal outlines count A., I., 1., a), aa) and (1). Whoever keeps them by hand renumbers after every rearrangement. Goethe Write does it for you.
The six levels:
| Level | Example |
|---|---|
| 1 | A. |
| 2 | I. |
| 3 | 1. |
| 4 | a) |
| 5 | aa) |
| 6 | (1) |
To set the numbering:
- Write the heading as a paragraph, for example "Anspruch auf Kaufpreiszahlung".
- Choose Home ▸ Paragraph ▸ Legal Numbering (or, in the menu bar, Format ▸ Lists ▸ Legal Numbering).
- The paragraph gets the right number. If it belongs under a heading, it takes the level of the point before it.
- Press ↩ and write the next point. It keeps counting.
To change the level:
- Increase Indent (⌥⌘]) turns an "A." into an "I.". The paragraph moves one level down, and its heading adapts.
- Decrease Indent (⌥⌘[) goes one level up. At the top level the paragraph leaves the outline.
- If you give a numbered paragraph the style Heading 3, an "A." becomes a "1.".
- If you give it Body Text, it loses its number.
Renumber (in the same submenu) counts everything again in case you rearranged things. Mostly that happens by itself.
Example from practice: You are writing a legal opinion. One point of your analysis really belongs one level higher. You put the insertion point in the heading and press ⌥⌘[. A "2. Einigung" becomes an "II. Einigung", the following points count along, and the table of contents is right again.
The opinion itself lives on four steps: the statement of the issue (Obersatz), the definition, the subsumption and the result. The Legal Opinion template is built this way: each point has the four sentences to write over.
Margin numbers
In opinions and articles one cites paragraphs by margin number ("Rn. 12"). Switch them on with Layout ▸ Header and Footer ▸ Margin Numbers. The program numbers the paragraphs in the margin, in page layout and in the export. Your reader can then name a paragraph as "Rn. 12".
Arguments, Case File and Chronology, Terms and Values, Clause Library, Literature
The five tools of the group Law stand on the left in the sidebar under Tools. You also reach them through the Go menu. Each shows a small gray line with the project title at the top and its own title below it.
Two ideas run through all five:
- They are tied to the text. A link to a passage follows the text even when you keep editing it. If you delete the passage, the tool notices.
- They tell you what is missing. Where evidence or a rebuttal is missing, it says so.
Arguments
What it is for. The Arguments tool is the map of your line of proof. It shows which claims you make, what supports them, what speaks against them and what you reply. If something is missing, it says so.
The five kinds of points:
| Kind | What for |
|---|---|
| Claim | What you assert. The main claims stand at the top. |
| Evidence | What supports the claim. |
| Counterargument | What speaks against the claim. |
| Rebuttal | Your answer to a counterargument. |
| Conclusion | What follows from the claim. |
What may stand below which point:
| Below a … | can stand |
|---|---|
| Claim | Evidence, Counterargument, Conclusion |
| Evidence | Counterargument |
| Counterargument | Rebuttal, Evidence |
| Rebuttal | Evidence, Counterargument |
| Conclusion | nothing |
To build an argument map:
- Open Arguments in the sidebar. If it is empty you see: "No Arguments Yet".
- Click New Claim.
- The sheet opens. Choose the Type, write one sentence in Title ("What is asserted, in one sentence") and, in Details, the reasoning and specifics.
- If you want to tie the point to the text: first select in the text the passage where you say this. Then click Link to Passage in the sheet.
- Under Evidence you see the evidence at this passage. Add Evidence… opens the sheet for new evidence. Even without a passage you can name, under Citation, a Document from the research and the Location in it ("S. 3" or "Rn. 12"). As soon as you link a passage later, this becomes evidence at that passage.
- Click Add.
Below an existing point you attach a new one with the + in its row. It shows only what fits there.
What the map tells you. Beside each row it says what is missing:
- Evidence Missing: A claim counts as supported when evidence stands below it or its passage has evidence (document, citation and check status). A passage alone is not yet evidence.
- No Rebuttal: A counterargument has no rebuttal.
At the top, one sentence sums it up. It counts the claims, the evidence, the counterarguments and so on, and names the gaps, for example: "1 of 3 claims still need evidence, and 1 counterargument has no rebuttal yet."
Operation:
| What you want | How |
|---|---|
| Collapse or expand everything | The button Collapse All / Expand All at the top right |
| Open a point | Click the row |
| Jump to the passage | The quote symbol in the row, or right-click ▸ Go to Passage |
| Open the document alongside | Right-click ▸ Open Document |
| Change a point | Right-click ▸ Edit… |
| Delete a point | Right-click ▸ Delete… (the point and everything below it; ⌘Z takes it back) |
The right-click menu also has Goethe…: Goethe can help you with a point (Chapter 16).
Example from practice: You defend a defendant. Your main claim: "No right of rescission for the plaintiff." Below it hangs the evidence "§ 3 of the purchase contract (Exhibit K 1)" with a page reference. You have created the counterargument "Fraud under § 444 BGB" but no rebuttal yet. The map shows you at once: "No Rebuttal". You write the rebuttal, and the gap is closed.
Case File and Chronology
What it is. The case file records what has happened in the case and who says what about it. It has two parts, which you switch between at the top: Chronology and Evidence Chains. In the type of work Law it is the phase Facts.
Chronology
The chronology puts the events in order by date. Each event has its parties and statements: what does each side assert about this event, with what time and what source?
To add an event:
- Click New Event. If the file is empty it says: "No Events Yet."
- Write what happened in Event.
- Switch on With Date and choose the day. Or enter in Time Reference how the file names the moment, for example "around 9 a.m." or "late 2023". Without a date, an event with a time reference is placed approximately; otherwise it comes last.
- Choose the Parties. They come from the section of the sidebar with the people of your case (in the legal templates it is called "Beteiligte"). If there are none yet, the sheet says: "No parties in the project yet."
- Add a Note: what is still to be clarified.
- Click Add.
To add a statement:
- In the event's row click the +, or right-click ▸ Add Statement…
- Under Who you name the party or person ("e.g. Klägerin, Zeuge Lehmann"). There are quick choices: plaintiff and defendant in German forms, and the parties from the project.
- Under Time you write when it happened according to this statement ("e.g. 14.11.2023, 8:12 Uhr").
- Under Statement you write what this side says about it.
- Link the statement to a passage (From Text Selection) or name under Citation a Document and the Location in it.
- Click Add.
What the chronology tells you: If two statements about an event give different times, the event says Conflicting. It shows the statements side by side. Below, a sentence explains the conflict ("The times contradict each other …"). At the top a summary says how many events have no date, how many conflict and how many statements still have no source.
Every statement shows its source: the evidence at the linked passage (with its check status) or the document and place you named. No Source appears if nothing is linked. The circle marks a piece of evidence as Checked or Unchecked.
Example from practice: The plaintiff says the painting was handed over on March 14, 2024. The defendant says: March 16. You create an event "Handover of the painting" with two statements. At once it says Conflicting. This is exactly the spot you have to prove cleanly in the brief.
Evidence Chains
Here you see every passage you have marked in the text (see Footnotes, sources, citations, cross-references, exhibits). For each it lists which sources hang on it. Evidence Missing appears for a submission or a piece of evidence without a source. A sentence explains the rule: your own submission, the other side's submission and evidence need support; undisputed passages and the legal assessment do not.
- A click on a passage shows it in the text.
- A click on a source opens the document.
- The circle checks off a piece of evidence: Mark as Checked or Mark as Unchecked. It is the same status as in Inspector ▸ Connections.
If nothing is marked yet, it says: "No Marked Passages Yet."
Terms and Values
This tool has three parts, which you switch between at the top: Values, Terms and References.
Values
What for. A value is something that has to read the same in many places: the case number, the amount in dispute, the client's name. You maintain it once. In the text it stands as a field. If you change the value, every place changes, in the export too.
To add a value:
- Click New Value.
- Write the Name (for example "Streitwert") and the value ("48.000 €").
- Under Note you can record where the value comes from.
An arrow on the row opens the details: name, note and a list of the places where the value stands. If you have opened a text first, Insert as Field puts the value where the insertion point is. Without an open text the sheet reminds you: "Open a text first to insert a value there as a field."
If you delete a value that stands in the text, the program asks first. The text then shows the name in angle brackets at that place, for example ‹Streitwert›.
Terms
What for. A term is a word you have defined: "Kaufsache", "Vertrag". The program searches for it in all texts, including inflected forms ("des Vertrags") and further forms you name.
To add a term:
- Click New Term.
- Write the Term.
- Under Also you name further forms, separated by commas (for example "Gemälde").
- Under Definition you write what it means in this text. Or you select the definition in the text and click Definition from Selection.
The row shows in how many places the term occurs. If a definition changes, the term stays marked ("Definition changed – check 4 places") until you have checked them. Then you click All Checked.
Example from practice: You define "Kaufsache" as "the painting, oil on canvas". Later you find the definition too narrow and change it. Goethe Write shows you every place where the term stands. You go through them and click All Checked.
References
This part shows the cross-references and exhibits in your text and tells you which have lost their target.
- References: every cross-reference to a section, with its current number. A reference without a target is shown in orange: "The section was deleted" or "Not in the manuscript and therefore has no number." Insert Cross-Reference to Section… inserts a new one.
- Exhibits: every exhibit the text names, with its number. Exhibits are the files in the Anlagen folder of the research, numbered in its order. Exhibit Prefixes sets the letter: "K" for the claimant's side, "B" for the defendant's side. Insert Exhibit… inserts an exhibit.
A cross-reference always shows the current number of its section; if you move parts, the numbers change along.
Clause Library
What it is for. The clause library collects wording you need again and again: clauses, motions, standard sentences. It knows placeholders, conditions, variants and approvals. It remembers where you inserted a clause and tells you when there is a newer approved version.
The tool has two parts: Clauses and Usage. At the top are a search field and New Clause.
To create a clause:
- Click New Clause. If the library is empty: "No Clauses Yet."
- The sheet "New Clause" opens. Enter a Title ("e.g. Gerichtsstand") and a Category ("e.g. Schlussbestimmungen"). Clauses of one category stand together in the list.
- Write the wording on the right. For values you write
{{Name}}. For text that should come along only in certain cases:{{#if Name}} … {{/if}}; for the other case{{#else}}; for the opposite{{#if not Name}}. If a condition stands alone on its line, the line disappears with it. (The German forms withwenn,sonstand/wennwork too.) An example: "Ausschließlicher Gerichtsstand ist {{Ort}}.{{#if Kaufleute}} Dies gilt nur unter Kaufleuten.{{/if}}" - Under Note you record when the clause fits. The note is not inserted.
- Click Save.
The program warns you if a condition is never closed or if an {{#else}} stands without a condition.
Variants. A variant is an alternative of the same clause, for example for consumers and for businesses. Every variant has its own wording, its own approval and its own versions. In the sheet you add one with New Variant (it starts with the wording shown), give it a Variant Name ("e.g. Standard") and delete it with Delete Variant.
Approving. Approved means reviewed and binding. With Approve you approve the variant; the approval carries your name and the date. Revoke takes it back. If you change approved wording, a new version is created; until you approve it, the previous one remains in force. Under What Changed? you write in one sentence what is new ("e.g. deadline extended to 14 days"). Earlier approved versions stand in a list with their date; Compare shows what changed: struck through in red is what dropped out, underlined in green what was added.
The list. The clauses are sorted by category, with approval and version. The search field at the top finds title, category, note and wording. Each row has the button Insert… at the right; a click on the row opens the clause for editing. In the right-click menu you find Insert…, Edit…, Show Usage, Duplicate and Delete.
Usage. This part shows where you inserted which clause in which version. A passage counts as locally adapted as soon as its text differs from the inserted wording. If there is a newer approved version, the passage appears at the top under Updates.
To take over a new version:
- At the passage click Compare…. You see both wordings side by side.
- Under What Should Happen? choose:
- Apply Version n: The passage gets the new wording; your changes to it drop out.
- Apply and Keep My Changes: What only you changed stays; what only the clause changed comes from the new version. If both changed the same paragraph, you choose for each paragraph New Version or Your Version.
- Keep Local Change or Stay at Version n: The passage stays as it is. A notice comes again only when an even newer version is approved.
- Confirm. Before that, Goethe Write saves the text as a snapshot; you lose nothing.
With Go to Passage you jump to the place in the text, with Unlink the program forgets the place.
Example from practice: Your firm changes the clause "Gerichtsstand". You approve the new version 2. In three running briefs the clause appears under Updates. In two of them you take version 2. In the third you had worded the sentence differently on purpose; there you choose Keep Local Change.
Literature
What it is for. The Literature tool collects your works: textbooks, commentaries, articles, contributions and online sources. You enter them once. Footnotes then cite them in short form, and the bibliography builds itself. The list is sorted the way the bibliography is sorted: by authors, field by field.
To enter a work:
- Click New Work. If the list is empty: "No Literature Yet." There is also Add Work.
- Choose the Type: Book, Commentary, Article, Chapter in an Edited Volume or Online Source.
- Fill in: Author (for a commentary Editor or Founder), Title and Short Title. Separate several names with semicolons, each as "Last Name, First Name". Footnotes cite with the short title, such as "MüKoBGB" or "Miete". For books and commentaries, switch on The names are editors (eds.) if it applies.
- Under Citation you enter the details for the type:
| Type | Fields |
|---|---|
| Book, Commentary | Edition, Volume, Place, Year |
| Article | Journal, Volume, Year, First Page |
| Chapter in an Edited Volume | Published In, Editor of the Work, Place, Year, First Page |
| Online Source | Web Address, Accessed On |
- A Preview shows the entry as it will appear in the bibliography, and the short citation. Empty details drop out of the bibliography with their punctuation.
- Click Save.
Each row shows whether and how often the work has been cited ("not yet cited" or "cited in 3 footnotes"). Under the list it says how many works are still cited in no footnote. At the bottom you switch on Add Bibliography: the bibliography then comes in PDF, Word and print.
The citation style. The program sets the works in German legal style. If the project's language is English, it takes English style (OSCOLA).
Example from practice: You enter the commentary "Blank/Börstinghaus, Miete" with the short title "Miete". Half a year later you write a new article. You do not have to type the work again; you cite it in two clicks.
Clauses and values
The commands for inserting stand in the ribbon under Insert and in the Insert menu. Both show only what your project has.
Insert a value as a field
A field is a piece of text that the program fills in for you. You see it in the text underlined with a dotted line and in the color of links. It is part of the sentence, but you recognize that the program fills it.
- Put the insertion point where the value should stand.
- Choose Insert ▸ Field. The command appears only if your project has values.
- Choose the value from the menu. The menu shows "Name: value", for example "Streitwert: 48.000 €".
The value stands in the text. If you change it under Terms and Values, every place changes. The export writes the value out. In other programs a field appears as ⟦var:Streitwert⟧.
Example from practice: The case number of the lawsuit changes because the court assigns a new one. You change the value Case Number in one place. In the caption, the header and the closing the new one stands at once.
Insert a clause
- Put the insertion point where the clause should stand. Or select the passage it should replace.
- Choose Insert ▸ Clause and then the clause. If there is none yet it says: "No clauses in the project yet". Or click Insert… in the library.
- The sheet for inserting asks what it needs:
- Variant, if there are several. The approved one is marked "(approved)".
- Version, if a draft exists beside the approved version: the approved version or the draft.
- Conditions: switches for text that comes along only in certain cases. Suggested is what the project holds as a value of the same name ("no" switches off).
- Values: one field per placeholder. The values of your project are suggested. Switch on Save New Values in Project if new values should move into the project. What you change here applies only to this clause.
- On the right you see a Preview. Fields from the project are underlined. Warnings stand below.
- Click Insert.
Values of the project come into the text as a field. If you change them later under "Terms and Values", the text changes along. Goethe Write remembers the place and tells you about new versions.
If you open the sheet with no text open, it says: "Open a text first: it is inserted where the insertion point is."
Important: A change takes effect in every place where the value stands as a field. If you merely typed a value instead of inserting it as a field, it does not change along. To be sure, always use Insert ▸ Field.
Footnotes, sources, citations, cross-references, exhibits
These commands stand in the ribbon under References, in the groups Footnotes and Citations and Cross-References. You also find them in the Insert menu.
Footnote
A footnote in Goethe Write is a real footnote. In the text stands a small superscript sign in the color of links. The number is never stored; it results from the footnote's place among all footnotes. If you insert one, move one or delete one, all the others count anew at once. In PDF and print the footnotes stand at the foot of the page. In Word and RTF they stay real footnotes.
- Put the insertion point at the place in the text.
- Choose Insert ▸ Footnote or press ⌥⌘F.
- The footnote opens for writing. Write the text. You set italics or bold as in the text; authors are often set in italics.
- Later, click the sign in the text to open the footnote again.
Between footnotes you jump with References ▸ Footnotes ▸ Next Footnote and Previous Footnote (also in the Go menu).
Cite
For works from your Literature, Cite inserts the short citation as a footnote.
- Put the insertion point where the footnote should stand.
- Choose References ▸ Citations and Cross-References ▸ Cite and the work. The command appears in law and academic projects. If there is no literature yet: "No literature in the project yet". (Or click Cite… in the Literature tool.)
- The sheet Cite opens:
- Work: the work you cite.
- For a commentary in German style also Commentator ("e.g. Blank") and Statute ("e.g. § 536"). A commentary is cited by the name of the person who commented on the provision.
- For a book or commentary Cited After: Margin Number or Page. Below it stands the field for the number ("e.g. 12"). For an article the field is called Cited Page, for a chapter in an edited volume Page, for an online source Paragraph.
- Addition: a signal word before the citation: "Vgl.", "Siehe", "So auch", "Ebenso", "A. A." or "Ähnlich" (in English style "See", "See also" and others).
- At the bottom it says where the footnote will be inserted. Click Insert.
The result is a short citation in German legal style, such as "Blank/Börstinghaus, Miete, § 536 Rn. 12." The footnote ends with a period.
Evidence (source)
Evidence links a statement in the text to the place in a document that carries it. It is more than a footnote: the program can check whether the wording really stands there.
- Select the statement in the text. Without a selection the paragraph counts.
- Choose References ▸ Citations and Cross-References ▸ Evidence…
- The sheet shows the Statement in Text at the top. Below, under Source:
- Document: a document from your research (or No Document).
- Citation: for example "S. 12" or "Rn. 34".
- Original Passage: the wording in the source.
- Note.
- Checked: a switch, if you have checked it yourself.
- Click Add.
Check Paragraph (⌃⌘P, in the tab Review) looks for the original passage in the document and tells you if it does not stand there. More in Chapter 11.
Unchecked evidence appears in the right margin as a small sign beside the line.
Mark
With Mark you say which role a paragraph plays in the brief. The evidence chain needs this: it shows where a submission still has no evidence.
- Put the insertion point in the paragraph.
- Choose References ▸ Citations and Cross-References ▸ Mark and one of the roles:
| Role | Color in the margin |
|---|---|
| Own Submission | Blue |
| Other Side's Submission | Orange |
| Undisputed | Gray |
| Evidence | Green |
| Legal Assessment | Teal |
- Remove Mark takes the role away again.
The role appears as a colored bar to the left of the paragraph. Under View ▸ Show ▸ Marks you show or hide the bars.
Cross-Reference
A cross-reference points to another section and counts along when you rearrange. "See above under B. II. 1." stays right after the rebuild too.
- Put the insertion point where the reference should stand.
- Choose References ▸ Citations and Cross-References ▸ Cross-Reference. The menu lists the sections of your manuscript, indented by level. If the manuscript has no texts yet the command does not work: "No Texts in the Manuscript Yet".
- Choose the section.
The reference shows what the export prints for the target: the numbers of the outline ("B. II. 1."), the decimal number if the export numbers its headings ("Section 2.1"), or the title in quotation marks. It never switches numbering on by itself.
Exhibit
Exhibits are files in the Anlagen folder of your research. They are numbered in its order: Exhibit K 1, K 2 … You set the letter under Terms and Values ▸ References ▸ Exhibit Prefixes.
- Put the file in the Anlagen folder of the research.
- In the text, put the insertion point where the exhibit should be named.
- Choose References ▸ Citations and Cross-References ▸ Exhibit. The menu lists the exhibits as "K 1 – Title". If there are none yet: "No exhibits in the project yet".
If you rearrange the exhibits in the research, the numbers change in every reference.
Statutes in the text
If you cite a statute ("§ 823 Abs. 1 BGB", "Art. 2 Abs. 1 GG", "Art. 6 Abs. 1 lit. f DSGVO"), the program recognizes it. Under Inspector ▸ Statutes you see which statutes your text cites, and a click opens the statute in Lexxington (you need an internet connection for that). The statutes are marked in the text; under View ▸ Show ▸ Marks you switch this on or off.
Tables and indexes
These lists are made in the export. You switch them on under References ▸ Lists.
| Command | What it does |
|---|---|
| Table of Contents | A switch. Switched on, PDF, Word and print begin with the table of contents. |
| Levels | A menu from 1 Level to 4 Levels: how deep the list goes. |
| Bibliography | A switch (in law and academic projects). Switched on, the bibliography comes after the text. |
A new project has the table of contents on by default, with two levels; some templates set this differently (the Law School Paper, for example, with four levels and a bibliography). The bibliography is otherwise off at first.
Where the list stands
- The table of contents appears at the beginning. If you want it in a particular place, create at the beginning of the manuscript a text titled Gliederung, Inhalt, Inhaltsverzeichnis, Inhaltsübersicht, Contents or Table of Contents. The export puts the list there. The Law School Paper template does it this way: its text Gliederung carries the headings of the opinion, and the export replaces it with the table of contents with page numbers.
- The bibliography stands after the text. If the manuscript already has a text titled Literaturverzeichnis, Literatur or Bibliography, the list goes there.
- A cover page (a text titled "Deckblatt", "Titelblatt", "Titelseite", "Cover" or "Title Page") stands at the very beginning and carries no page number.
- Lists before the text count in Roman numerals. The text starts again at 1.
Example from practice: A seminar paper requires: cover page, outline, bibliography, then the text. You create the Law School Paper template. You switch on Bibliography, choose under Levels the depth your chair wants, and export as PDF. Outline and bibliography come from your headings and your literature.
Which export setting suits which purpose is in Chapter 14. For headers, footers and page numbers see Chapter 13.
The nonfiction book
A nonfiction book explains something. It has no characters, no beats and no brief, but it carries the same burden: outline, sources, lists. Goethe Write therefore treats it as a work of its own kind.
The template
The template Nonfiction Book (File ▸ New Project…) brings:
- Einleitung (introduction): "what it is about, whom the book is for and what readers can do or understand at the end."
- Kapitel 1 (the problem), Kapitel 2 (the basics), Kapitel 3 (the way), each with a guiding question.
- Schluss (conclusion): the most important points in a few sentences and an outlook.
- In the research a text Quellen (sources): every source with its full details, so that citations and bibliography are right.
The template switches on no tool group. The type of work is Nonfiction Book. (As everywhere, the template's own texts are written in German.)
Outline instead of beats
A novel plans its plot in beats, on a board. A nonfiction book plans its structure. That is why the third phase in the head of the window is not called Beats but Outline.
The phases of the nonfiction book: Idea · Research · Outline · Manuscript · Revision · Output.
- Idea shows a page with four parts that are named differently for nonfiction than for novels: The Work in One Sentence ("What question does it answer, and for whom?"), Key Message and Benefit ("What should readers know or be able to do at the end?"), Ideas and Notes ("Examples, questions, objections, wording") and Basics with Topic and For Whom.
- Outline shows the manuscript as a table: title, status, words and synopsis. A double click on a row opens the text in the manuscript. Here you rearrange the structure, see which chapter is still in draft and write a synopsis for each.
- Research shows material; characters and places only as long as there are any.
Chapter styles
For a nonfiction book the paragraph styles in the ribbon carry the names of a book:
| Style | Name in the nonfiction book | Shortcut |
|---|---|---|
| Heading 1 | Chapter | ⌥⌘1 |
| Heading 2 | Subchapter | ⌥⌘2 |
| Heading 3 | Section | ⌥⌘3 |
| Heading 4 | Subheading | ⌥⌘4 |
| Heading 5 | Subsection | ⌥⌘5 |
| Heading 6 | Outline Item | ⌥⌘6 |
| Body Text | Body Text | ⌥⌘0 |
| Block Quote | Block Quote | ⌥⌘7 |
Only the name changes. The levels stay.
When your nonfiction book needs sources
A guide gets by with the research. A nonfiction book with a scholarly apparatus needs more. Under Project ▸ Tools… switch on the group Academic. It brings Literature and Terms and Values. Then Cite, Cross-Reference and the Bibliography are available to you as well. The group Consulting brings Clause Library and Terms and Values, handy for works with recurring paragraphs.
Example from practice: You write a guide to tenancy law for laypeople. You choose the template Nonfiction Book, switch on Academic and enter three commentaries and five articles in the Literature tool. While writing you set the footnotes with Cite. At the end you switch on Bibliography and export. The list of sources is done without you ever typing a line of it.
More about the outline itself is in Chapter 6. An example of the way from first idea to finished text is in Chapter 26.