Goethe Write
EN

Chapter 23

Accessibility

16 min readLast updated:

Anyone should be able to write, whether with VoiceOver, with the keyboard alone, with large type, in bright light, or when the eyes are tired. This chapter tells you what Goethe Write does for that and how you switch it on. It also tells you where the limits are. We describe only what the program really does today.

The chapter has two parts:

  • VoiceOver: what the program reads aloud and how you use the drawn pictures (Timeline, relationship map, cards).
  • Keyboard and appearance: the ribbon without a mouse, zoom, light and dark, paper, calm while you write.

Tip: Everything you read here builds on the system settings of macOS: you switch on VoiceOver in System Settings under Accessibility, and likewise Increase Contrast, Reduce Motion and keyboard navigation for all controls.

VoiceOver

How the program is built

Most of Goethe Write is made of controls that macOS itself provides: menus, buttons, lists, sheets, text fields. VoiceOver knows them and reads them as in any Mac program. The text you write lives in a text field of macOS.

Some areas, however, are drawn: the Timeline, the relationship map and the boards of Plot. For these the program provides elements of its own for VoiceOver, which say with a name, a value and actions what you have in front of you. These elements are made when VoiceOver asks for them and stay valid for the picture they describe.

The ribbon and its hints

Every command in the ribbon has a full name and a short sentence about what it does. After the name VoiceOver reads this sentence. If a command is not possible right now, it reads the reason instead ("Open the Relationships page first."). Whoever can see gets the same information when pointing at it: name, sentence and keyboard shortcut.

All commands of the ribbon are also in the menu bar, with the same name and the same shortcut. So you can decide whether to use the ribbon, the menu bar or search: Search Commands (⌃⌘K) finds every command with its place.

The phase bar

In the head of the window are the phases of your work (for example Idea, Research, Beats, Manuscript). For VoiceOver the bar is called Phases. Each phase is a button with its name. VoiceOver reads a sentence about what the phase is, such as "Beats and Plot: plan the story step by step and link it to scenes" or "Revision: notices, comments, questions, changes, and evidence in one place", and tells you which phase is currently selected. The arrows between them are pure decoration and are skipped.

To move from phase to phase without the mouse:

  1. Move the VoiceOver cursor to the Phases bar.
  2. Choose a phase and activate it.

Alternatively you open any phase through the Go menu or with Search Commands ("Show Phase").

Search fields

The search fields carry their name as their label. The button that empties the field is called Clear Search. Esc empties the field, a second Esc leaves it.

The Timeline

The Timeline is drawn, so each of its parts gets an element of its own. After every step the program says the answer aloud (for example the new position, "Undone." after an undo, or "Match 2 of 5: Title" during a search).

The position. It is a slider called Position (in the German interface Stelle). Its value says where you are in the work: "Standard page 165 of 441, Scene 28 of 90". Depending on the chosen measure it says "Word 1,200 of 80,000, Scene …" or only the scene. With the VoiceOver actions Increase and Decrease you move scene by scene, forward and back; the text jumps along.

The rows. Every visible row is a group with its name and the number of its scenes. Inside are:

  • Scenes. Each scene is a button, for example "Scene 28: The Empty House". The value tells in which tracks it lies ("Track Anna" or "Tracks Anna, Jonas"), its length, its status, whether it is a Flashback, and whether it is selected. Actions: Open Text, and where rearranging is allowed Move Earlier and Move Later.
  • Chapters and days (the outline of the Timeline). They read their title and, when folded, "collapsed". With Expand or Collapse you open and close them. In Chronology, for texts without a date whose date stands in the When field, there is an action to take them all over.

The track list. Each track is a group with its name. Its value gives kind, number of scenes, Track Visible or Track Hidden, Track Locked, and the Label with its name. So colors are never conveyed by the color alone. The actions: Hide Track or Show Track, Lock Track or Unlock Track, Rename Track, Move Track Up, Move Track Down, Expand Track or Collapse Track.

Properties and curves. A property, such as tension, is a row with its name and its value at the chosen position. You change the value with Increase and Decrease or with the actions Increase Value, Decrease Value and Change Value…. With Show Curve and Collapse Curve you show and hide the curve. When a curve is on, the row says how many points it has ("12 actual points, 4 target points"). Every point is an element of its own ("Tension of “The Empty House”").

The foot. Its words are buttons; the slider and the scroll bar say in words which section you are seeing: "Standard page 120 to 132 of 441".

Even without VoiceOver the Timeline has a keyboard of its own: after a click on the Timeline, letters and arrow keys belong to it. If a text or field has the cursor, it keeps its keys. With the Tab key (with full keyboard access switched on) you move on from the picture to the foot.

The relationship map

For VoiceOver the picture is called Relationship Map. Every character, relationship and group is an element of its own:

  • Character: a button with name and role ("Lena Berger, lawyer"). The hint reads "Selects the character. Her or his relationships then appear in Info." Action: Open (opens the character's text).
  • Relationship: an element that says it in one sentence, like the help tag: "Lena Berger: Lawyer for Jakob Brandt", and with different roles also the other side. Actions: Edit and Delete.
  • Group: "Group Berger Family". Actions: Edit and Delete.

The buttons Zoom Out and Zoom In and the search field ("Search Characters and Relationships") have names. The Inspector beside the picture (see Chapter 7) reads what you have selected.

Creating a relationship without the mouse: Dragging from character to character is a mouse movement. You do not need it. Choose Create Relationship … (in the Inspector or with Search Commands); a sheet opens with ordinary fields (From, To, Type, Relation, Reciprocal Role, From Scene, Through and Note) that you operate with the keyboard and VoiceOver.

Cards and Beat Board

  • Cards: The board is called "Cards of “Title”". Each card is a button whose name combines title, synopsis and foot line. It says whether it is selected. Actions: Open and, as usual with VoiceOver, Show Menu, which opens the same entry menu as a right-click. The color of a card is named ("Label" and the color's name), never only shown as a color.
  • Beat Board: The buttons are labeled: Edit Beat, "Add Beat to Act 2", Zoom Out, Zoom In. Assigning a beat to another act also works without dragging: open Edit Beat and set the Act.

The boards of Plot

An honest limit: In the Threads, Knowledge and Development boards, circles, dots, lines and flags are decoration for VoiceOver. They are meant for the eyes. The same information, however, stands in words elsewhere:

  • Under the name of each thread stands its state ("Still Open", "Paid Off" and so on), which is part of the name.
  • In Knowledge, under the character's name it says whether she uses it too early or learns it nowhere.
  • You create and change everything in sheets with ordinary fields: for threads you click the name (Edit Thread…) and choose the scenes from menus (Set Up In, Paid Off In). In Knowledge the click on the character's name opens a small sheet with Learns It In, Acts on It In and Add Scene…. In Development the click on the name shows the Inspector with Add Entry…, and the sheet has For, From Scene, Detail and New Value.

Setting with a right-click in a scene is a path for the mouse; the sheet is the same path with the keyboard.

Evaluations

The pictures of Analysis (Tension Arc, Scene Lengths, Points of View, Appearances) are charts. Each has a sentence under it with the most important numbers: how many scenes you rated and where the highest point lies, the average scene length, who narrates how much, who is missing for how long. These sentences are part of the page's text and are read aloud. The notices in the Review ("Character Absent Long", "Knowledge Too Early") tell you the same in words, with an action Go to Passage.

Settings and sheets

  • Settings: Each setting has its name on the control; the explanatory sentence below is read as the control's hint instead of appearing twice.
  • Number fields (measurements and spacings, for example in page setup): VoiceOver reads them as sliders; with Increase and Decrease you change the value. You can also type, with units (cm, mm, pt) and small calculations ("15+2").
  • Deeper pages in the Inspector (a text's page, a character's page) have a back button at the top that reads "Back to …" with the name of the page above.

Honest limits

Not everything is equally accessible, and we would rather tell you than promise something:

  • Best worked out are the Timeline, the relationship map, the phase bar, the cards and the ribbon.
  • Where a picture works only with the mouse (moving cards on the free canvas of the Beat Board, moving characters by hand in the relationship map, setting points in the Plot boards by right-click), there is a path through a sheet or a command. It is named in this chapter.
  • The arrangement of the characters in the relationship map and the position of the beats on the free canvas are picture information. With VoiceOver you get the content (who with whom), but not where something lies. Arrange takes the work off your hands.
  • Whether every chart of Analysis has an element of its own for VoiceOver is not guaranteed; rely on the sentences below them.

Note: If you find a place that VoiceOver does not speak, write to us. Accessibility gets better when it is used.

Keyboard and appearance

The ribbon by keyboard

With the ribbon you reach every command without touching the mouse. The principle: the program shows you a letter on every tab and every command. If you type it, what a click would have done happens.

Here is how:

  1. Press ⌃⌘M (View ▸ Ribbon with the Keyboard). A small letter appears over each tab.
  2. Type the letter of a tab: Home, Insert, Layout, References, Review or View. The tab opens, and every one of its commands now has a letter, sometimes two.
  3. Type the letter of the command. It is carried out as a click would have carried it out: a command runs, a menu opens as a real menu (with ↑ ↓ and ↩ you go on in it), or the insertion point jumps into the field.
  4. With Esc you step back one level at a time and finally return to the text; selection and cursor are then as they were.

The letters come from the names: the first letter if no other command in the tab begins with it, otherwise two (the second is the digit the name ends in, as in "Heading 2", otherwise the next free letter of the name). Ä, Ö, Ü and ß count as A, O, U and S, so the letters are the same on every keyboard.

These also work:

KeyWhat it does while the letters are shown
← → ↑ ↓moves a ring from place to place; ↑ from the top row goes to the tabs, ↓ from a tab into its band
⇥ (⇧⇥)goes to the next (previous) place
↩ or the space baruses the place in the ring
Escsteps back one level: first the typed letter, then from the band to the tabs, then out of the ribbon back into the text
⌃⌘Mswitches the letters off again

If you press another shortcut with ⌘, ⌃ or ⌥, the letters end and the shortcut applies as usual.

Tip: If you are looking for a command whose tab you do not know, use Search Commands (⌃⌘K) instead. Type a keyword, choose with ↑ and ↓, press ↩. Behind every hit stands its place in the ribbon.

With Keep Ribbon Open (⌥⌘R) the band stays open instead of collapsing again after use.

Important shortcuts for working without the mouse

These shortcuts stand in the menus as you see them there. You find all the others in the window Help ▸ Keyboard Shortcuts and in the menus themselves.

ShortcutCommand
⌘1 · ⌘2 · ⌘3View ▸ Text · Cards · Table
⌘4 · ⌘5Go ▸ Overview · Timeline
⌥⌘↓ · ⌥⌘↑Go ▸ Next Text · Previous Text
⇧⌘OGo ▸ Quick Open…
⌘[ · ⌘]Go ▸ Back · Forward
⌃⌘SView ▸ Show Sidebar
⌃⌘NShow Navigator
⌥⌘IShow Inspector
⌥⌘JShow Bottom Panel
⌃⌘↩Maximize (the chosen area takes the middle and the space below); with ⌃⌘↩ or Esc Restore again
⌃⌘FEnter Full Screen
⇧⌘↩Focus
⌃⌘GEdit ▸ Ask Goethe
⌃⌘KSearch Commands
⌃⌘MRibbon with the Keyboard
⌥⌘N · ⇧⌘NEntry ▸ New Text · New Folder
⌃⌘↑ ⌃⌘↓ ⌃⌘→ ⌃⌘←Entry ▸ Move: up, down, increase indent, decrease indent
⌘?Help ▸ Goethe Write Help

Zoom

You can make the text larger or smaller. Zoom acts on the text and the page, not on the menus.

  • ⌘+ (Zoom In) shows the text one step larger, ⌘− (Zoom Out) one step smaller, ⌘0 (Actual Size) resets to 100 percent.
  • The menu View ▸ Zoom also offers Fit to Window (the font grows with the window in steps, the characters per line stay the same), Page Width and Whole Page, as well as fixed steps: 25, 50, 75, 100, 125, 150, 200, 300, 400 and 500 percent.
  • Line Width (View ▸ Line Width): Narrow, Medium or Wide, how many characters fit on a line.
  • Invisibles (⇧⌘8) show paragraph marks and spaces when you want to see the structure exactly.

The relationship map and the Beat Board have their own zoom (35 to 250 percent, 40 to 150 percent). In the relationship map, ⌘+, ⌘− and ⌘0 apply to the picture while it has the keyboard.

Light and dark

At the very end of the General page in Settings… stands the row Change Appearance…. Because most people work dark in Goethe Write, the choice is folded there until you open it. Then, under Appearance, you choose:

  • Dark (the default),
  • Light or
  • Same as Mac (follows the setting of macOS, even if it changes during the day).

To switch:

  1. Open Settings… (⌘,).
  2. Choose General and click Change Appearance… at the bottom.
  3. Under Appearance make your choice. It applies at once in all windows.

The language of the interface (Same as Mac, Deutsch or English) you set on the same page, at the top. It applies after a restart, which Goethe Write offers you.

Increase Contrast: If you switch on Increase Contrast in System Settings, Goethe Write follows it: text and accents become stronger.

Paper

The page you write on stays paper: light, even when the interface is dark. In the dark appearance the paper comes in three tones:

  • Light (white paper),
  • Dimmed (a soft, less glaring tone),
  • Dark (dark paper with light text).

You choose it under Settings… ▸ General ▸ Change Appearance… ▸ Paper or in the menu View ▸ Paper. Both are the same setting. In the light interface the paper is always light; there the choices are dimmed. Printing, PDF and Word stay as they are, whatever you set for the screen.

For one project you can keep the Timeline dark even if the window is light: View ▸ Always Dark Timeline.

Example: You write in the evening. The interface is dark, but the white paper glares. You set the paper to Dimmed: the rest stays, and the page is calmer.

Calm while you write

Whoever is distracted writes worse. Goethe Write therefore has several means of keeping the screen calm.

Focus (View ▸ Focus, ⇧⌘↩) hides everything that does not belong to writing. As long as a project window is in focus, the whole program becomes calm:

  • Nothing moves: no animation, even without Reduce Motion.
  • Help tags do not open by themselves wherever the pointer happens to rest.
  • Controls do not light up when you move the mouse over them.
  • A detached Inspector or Navigator stays visible beside the text column in focus, without grabbing the keyboard, and steps back to a faint trace as soon as the line you are writing would come under it. It lets the pointer through, without moving or changing its size, and comes back when the line is free again. So it never covers what you write.

In addition:

  • Typewriter (View ▸ Typewriter): The line you are writing stays in the middle; the text scrolls past under you.
  • Dim (View ▸ Dim ▸ Paragraph or Off): In focus the other paragraphs recede; the one you write in stays bright.
  • Reduce Motion: If you switch this on in System Settings, Goethe Write gives up its movements. What changes appears at once, including folding and unfolding in lists.

Both also appear under Settings… ▸ Writing ▸ While Writing as Typewriter Mode and Dim in Focus. There, for dimming, you can also choose Sentence or Line. It is the same state in both places, and the place you used last decides.

What the Mac corrects by itself as you type (quotation marks, dashes, text replacement, spelling) you switch on or off under Settings… ▸ Text and Typesetting. On every page of the settings, Restore Defaults… brings the page's values back.

Example: An author who is quickly distracted by movement on the screen switches on Reduce Motion, adds Focus and Typewriter, and works in the Dark interface with Dimmed paper. The program holds still, the line stays in the middle, and nothing blinks.

How you protect your work is in Chapter 15: Saving, versions and backups; how you plan characters, threads and beats is in Chapter 7: Planning the story.