Goethe Write
EN

Chapter 7

Planning the story

41 min readLast updated:

A story has a lot of moving parts: people, places, secrets, turning points, the rules of an invented world. The longer the work grows, the harder it gets to keep it all in your head. Goethe Write takes that weight off you. You write down what you know, the program puts it in front of you again at the right moment, and it speaks up when something does not add up.

This chapter takes you through all the planning tools:

Tip: You do not have to use any of this. If you like to simply start writing, do that. The tools wait until you need them. Many writers begin with characters and beats and only reach Analysis when they revise.

Which tools you see

Not every project shows every tool. Goethe Write follows the Type of Work of your project (Project ▸ Type of Work): Novel, Nonfiction Book, Law or Screenplay.

Type of WorkPhases in the head of the windowTool group
NovelIdea · Research · Beats · Manuscript · Revision · OutputFiction
ScreenplayIdea · Research · Beats · Manuscript · Screenplay · Revision · OutputFiction
Nonfiction BookIdea · Research · Outline · Manuscript · Revision · Outputnone
LawFacts · Research · Outline · Brief · Revision · OutputLaw

The tools of this chapter (Timeline, Analysis, Plot, Relationships) belong to the Fiction group. They are there from the start in a novel or screenplay. In a nonfiction book or a legal project you switch them on one by one when you need them.

How to switch a tool on

  1. Choose Project ▸ Tools ….
  2. Switch on the Fiction group, or just the single tool you need.
  3. Close the sheet. The tool now appears in the sidebar and in the Go menu.

Changing the Type of Work is a single step that you can take back with ⌘Z. No text, character or screenplay is lost. Only the phases and the tools on offer change.

How to open a tool

There are four ways, and all of them lead to the same tool:

  1. The Go menu lists the tools your project shows. You reach Overview with ⌘4 and Timeline with ⌘5.
  2. Tools ▾ in the head of the window. The menu is organized in groups: Planning (Beat Board, Timeline, Plot, Relationships), Writing, Check, and Legal and Research. If you hold ⌥ while you click, the tool opens in a window of its own beside the text.
  3. The bottom panel: Timeline, Beat Board and Relationships sit there as tabs side by side. You show and hide it with View ▸ Show Bottom Panel (⌥⌘J).
  4. The sidebar, where the tool has a row.

Tip: Search Commands (⌃⌘K) finds every function in this chapter, even if you have forgotten where it lives. Type "relationship", for example.

Characters and places

Why this helps

A character is more than a name. You want to know how old she is, what drives her, what she fears, how she talks. And you want to look it up without paging through the manuscript. That is what a character's sheet is for. The same goes for places: what does it smell like there, when is it set, what does it mean for the story?

Example: Your novel has a lawyer in it. In chapter 3 she has gray eyes, in chapter 19 suddenly green ones. Had you noted "Look: gray eyes" on her sheet, you would have caught it. And with the sheet at hand, you do not make the mistake in chapter 19 in the first place.

Creating a character or a place

  1. Choose Entry ▸ New Character or Entry ▸ New Place. The same commands are in the New ▾ menu of the toolbar.
  2. The new entry appears in the sidebar in the Characters or Places section.
  3. Name the entry.
  4. Open the Inspector with View ▸ Show Inspector (⌥⌘I) to fill in the profile (see below).

If the Characters or Places section does not exist yet, Goethe Write creates it the first time.

Starting with a Character Sheet or Place Sheet

If you do not want to start from a blank sheet, take a prepared one.

  1. Choose Entry ▸ New from Template.
  2. Choose Character Sheet or Place Sheet. Your own templates appear below them, if you have saved any.
  3. The new entry is selected and waits for its name. The whole thing is a single step for ⌘Z.

The Character Sheet comes with twelve details, all empty:

DetailWhat it is for
RoleWhat the character is in the story. Shown under the name in the relationship map.
AgeA plain number; the check compares it with ages written in the text.
OriginWhere she comes from.
OccupationWhat she does.
LookWhat one sees.
NatureWhat she is like.
TargetWhat she wants.
NeedWhat she truly needs.
FearWhat she is afraid of.
ConflictWhat stands in her way.
DevelopmentHow she is meant to change.
Way of speakingHow she talks.

The text of the sheet has three headings with empty room beneath each: Backstory, Relationships and Turning Points.

The Place Sheet has nine details: Type, Location, Time, Mood, Light, Sounds, Smells, Who is here and Significance. Its text has the headings Description, History of the place and Scenes here.

Tip: The senses (light, sounds, smells) are the quickest route to places that feel real. Fill them in before you write the first scene there.

Your own entry templates

If you have set up a sheet the way you want it again and again, save it as a template. It is then available in all your projects.

  1. Select the entry in the sidebar. It must be an entry with text, not the Characters section itself.
  2. Choose Entry ▸ New from Template ▸ Save Selection as Template ….
  3. Give the template a name and confirm with Save.

The template carries the kind (character, place or text), the details, keywords, synopsis and text. New entries can then start this way.

To remove one of your own templates:

  1. Choose Entry ▸ New from Template ▸ Remove My Entry Template.
  2. Pick the template you want to remove.

That item only appears if you have templates of your own. The Character Sheet and the Place Sheet come with the program and always stay.

Saving the whole project as a template

If you want to keep a whole project as a starting point for future works:

  1. Choose File ▸ Save as Project Template ….
  2. Enter a Name, if you like a sentence about it (What a new project starts with (optional)), and decide about Include texts. If the box is off, only the outline with titles, descriptions and details is kept; the texts are empty.
  3. Confirm with Save.

New projects can then begin with File ▸ New Project… under My Templates. Snapshots and the writing history do not come along. A project from another Mac that you opened through Goethe Link cannot become a template; it belongs to its owner.

The profile in the Inspector

When you select a character or place in the sidebar, the Inspector (Info) shows five sections: Synopsis, Notes, Profile, Connections and Revision.

Profile: other names and details

Other Names takes nicknames and spellings, separated by commas, for example "Lena, Lenchen, Mrs. Berger". This matters more than it sounds: Goethe Write recognizes a character in the text by her name and her other names. Anything you enter here also adds the passages where only the nickname appears to Appears In.

Below are the details, each with a name and a value. You can change both directly in the Inspector. At most five are shown; Show All opens the full list.

To add a detail:

  1. In the profile, choose Add Statement ….
  2. Pick a suggestion from the menu, or Custom Detail to create an empty detail and name it yourself.
  3. Enter the value.

To remove a detail, right-click it and choose Remove.

The suggestions depend on your project's tools. For a character you always see Role and Born. If the fiction tools are on, Age, Occupation, Target, Fear, Conflict, Look and Relationships are added. With the legal tools there are Address and Represented By. For a place the suggestions are Type and, with the fiction tools, Location, Distinctive Features, Condition and Atmosphere. Whatever a sheet already has is not suggested again.

Some details do more than just sit there:

  • Role (also "Function", or in German "Rolle") is shown in the relationship map under the character's name. If it is missing, the synopsis is shown instead.
  • Age with a plain number is used by the continuity check: if the text gives a different age somewhere, Goethe Write asks you whether that is right.
  • Gender or Pronouns (the detail may carry either name) make sure relationship words are suggested to fit ("Daughter of" instead of "Child of"). More on that in the next section. It is never guessed from a name.

Connections

Under Connections you see:

  • Appears In: the texts that name the character or place, in manuscript order, with the number of mentions. A click opens the text.
  • Over the Course of the Story (with the fiction tools): the changes you recorded under Plot ▸ Development. A flag marks a turning point. Edit in Plot jumps there.
  • Involved In (legal tools only, when the character takes part in events of the case file).

Linking characters and places with a text

When you select a text, the Characters and Places page of the Inspector shows whom the text names or is linked with, along with the character's details at that point of the story. A word next to each row gives the reason: "narrates" (she is the point of view), "Place", the number of mentions, or "linked".

With Link … you add a character or place even if their name does not appear in the text, for instance for a scene that only hints. Unlink removes the link again (right-click the row).

Relationships

Why this helps

In a novel with twenty characters you eventually lose track of who was married to whom, who sued whom and whose brother-in-law is whose. The relationship map draws all characters as boxes and all relationships as lines between them, labeled with role and reciprocal role. You see at a glance where the connections are dense and where a character hangs alone at the edge.

Example: In a family saga you draw Lena as the daughter of Margarete and as the lawyer for Jakob Brandt. Later you notice that Jakob is also Margarete's opponent. The picture shows the conflict of interest before a reader does.

Opening the relationship map

The relationship map belongs to the fiction tools (group Fiction, see above). You open it:

  • with Go ▸ Relationships,
  • as the Relationships tab in the bottom panel (⌥⌘J), beside Timeline and Beat Board,
  • via Tools ▾ ▸ Planning ▸ Relationships.

If there is no character yet, it says "No characters yet." with the button Create Character.

The tool line

The line at the top of the relationship map contains, from left to right:

ElementWhat it does
Search fieldSearches characters and relationships. The cross clears the field.
GroupShows only one group (All Groups removes the filter). Also Create Group … and Edit Group.
TypeShows only one kind of relationship: All Kinds or one of the kinds that occur in the project.
Point in StoryShows the relationships that already exist at a given scene and have not yet ended. Whole Work removes the filter.
PlacesAlso shows the project's places in the map.
Matches OnlyOn: whatever the search and filters do not match disappears. Off: it stays in place, dimmed.
Relation (with plus)Creates a relationship. Available from two characters or places on.
ExportAs PDF … or As PNG …: the filtered map with all characters and labels.
MoreAppears when the line is too narrow. The rearmost parts move there first, each with its full name.

When a filter is set, its button is highlighted. Very large maps cannot be exported as PNG; you then get a note to export as PDF.

The footer of the picture counts: "4 Characters · 3 Relationships · 1 Group", with places added as "· 2 Places". To the right are Arrange, Show All, the two magnifying glasses with the slider, and the zoom value in percent. Zoom runs from 35 to 250 percent; each step of the magnifiers is a factor of 1.25.

Creating a relationship

You have three ways.

Way 1: dragging.

  1. Move the pointer onto a character. A dot appears at the right edge.
  2. Drag from the dot onto another character. (You can also drag the character itself while holding ⌥.)
  3. Let go. A small sheet opens at the second character.
  4. Choose the Type: Family, Love, Friendship, Rivalry, Work or Other.
  5. Type the Role, for example "Mother of", or tap one of the suggestions below. The Reciprocal Role fills itself in ("Daughter of").
  6. If needed, choose From Scene and Until Scene.
  7. Press ↩ or click Add. Esc or Cancel drops it.

If you let go over the empty background, nothing happens.

Way 2: with two selected characters. Select two characters (add the second with ⇧ or ⌘) and choose Create Relationship …: in the Inspector, in a character's right-click menu (it appears there once another character is selected), or with Search Commands. The small sheet opens at the second character; the relationship runs from the first to the second.

Way 3: the large sheet. If you do not have exactly two characters selected, Create Relationship … opens a larger sheet with all the fields:

FieldMeaning
From / ToThe two characters or places. They must be different.
TypeOne of the six kinds, a custom kind already in use, or Custom Type … (then you type a word, such as "Neighbors").
RelationThe role, for example "Mother of". The menu beside it (arrow) offers the catalogue's roles sorted by kind and your own words.
Reciprocal RoleWhat the other side is, for example "Daughter of". Filled in automatically; you can overwrite it.
Show DirectionThe line gets an arrowhead from the first character to the second. Off when both are the same to each other.
From SceneFrom when the relationship exists (From the Start).
ThroughThrough which scene it exists (No End).
NoteFree text.

Save only works once there are two different characters and a role. Goethe Write points out problems: the same relationship already exists during this period, the end comes before the start, or a character has been deleted in the meantime.

Roles, reciprocal roles and kinds

Goethe Write knows more than forty roles in six kinds, each with its reciprocal role. A few examples:

KindRole ↔ reciprocal role
FamilyMother of ↔ Daughter of; Sibling of; Married to; Divorced from
LoveLoves ↔ Loved by; Partner of; Engaged to
FriendshipFriend of; Allied with; Mentors ↔ Protégé of
RivalryEnemy of; Sues ↔ Sued by; Blackmails ↔ Blackmailed by
WorkRepresents ↔ Represented by; Works for ↔ Employs; Manages ↔ Reports to
OtherEverything that does not fit

Three rules matter:

  1. The catalogue only suggests. What you type stays as you typed it. You can overwrite the reciprocal role at any time, and your own words are always allowed.
  2. The kind follows the role as long as you have not chosen a kind yourself. Type "Sues" and the kind jumps to Rivalry. A word the catalogue does not know gives the kind Other unless you pick another.
  3. Woman, man or neither. If the character's sheet has a matching entry under Gender or Pronouns ("female", "she" and so on), Goethe Write suggests the matching word: "Daughter of", "Son of", "Lawyer for". If there is nothing, or something else (such as "nonbinary"), it takes the neutral word, which is never wrong: "Child of", "Represents". It is never guessed from a name.

The catalogue also recognizes roles in other languages: "Mother of" and "Mutter von" are the same role.

Each kind has its own color and symbol in the picture (house, heart, two figures, bolt, briefcase, dotted circle), so you can tell the kind even without labels.

Groups

A group gathers characters in a named frame: the Berger family, the investigation team, the farm.

  1. Select the characters that belong in it (⇧ or ⌘ while clicking adds).
  2. In the tool line, choose Group ▸ Create Group … (or Search Commands).
  3. Type the Name, for example "Berger Family".
  4. Choose a Label (the color). New groups receive their colors in turn; you can change it.
  5. If needed, tick further Members on or off; all characters and places are available.
  6. Confirm with Save.

You edit a group by double-clicking its name at the head of the frame, with Group ▸ Edit Group, or by right-clicking (Edit Group …, Delete Group). If you drag the head of the frame, all members move along.

Working in the picture

ActionHow
Select a character, relationship or groupClick. With ⇧ or ⌘ you add to the selection or take out of it. A click on empty ground selects nothing.
Select all characters⌘A
Jump to the next characterArrow keys: the selection moves to the nearest character in that direction.
Open a character's textDouble-click the character, or ↩
Edit a relationship or groupDouble-click the line, its label or the head of the group, or ↩
Move charactersDrag. Several selected characters move together. The positions are saved with the project and are one step for ⌘Z.
Move the pictureClick on empty ground and drag, or swipe with two fingers.
Zoom⌘ and mouse wheel (or two fingers), pinching, the magnifiers in the footer, or ⌘+, ⌘− and ⌘0 (actual size) while the picture has the keyboard.
Delete a relationship or groupSelect, then ⌫ or Delete. Characters are never deleted from here; they belong to the work, not to the picture.
Cancel an actionEsc cancels dragging a new relationship; a second Esc clears the selection.

The right-click menu depends on what you click:

  • On a character: Open Character; Create Relationship … if another character is selected; below that, all the character's relationships, to edit.
  • On a relationship: Edit Relationship …, Delete Relationship.
  • On a group: Edit Group …, Delete Group.

Under each character there is a line: her Role detail, otherwise her synopsis, as far as it fits on one line. The role and the reciprocal role of a relationship stand at the two ends of the line; if both are the same ("Friend of"), one word stands in the middle. If there is no free room beside the line, the word is not drawn; you see it in the help tag when you rest the pointer on the line. Labels also disappear when you zoom far out and remain available as help tags.

Arrange (in the footer) has Goethe Write lay out the picture anew. What you moved by hand is let go; with Undo (⌘Z) the old arrangement comes back. Show All adjusts the zoom so that the whole picture fits the window.

Tip: Arrange once, then drag only the two or three characters that are in the way. That way you have a readable picture in a minute.

The Inspector beside the picture

When you open the Inspector, it shows what you selected in the picture:

  • A character: Name, Role, Groups, the button Open Text, and below it all her Relationships, each worded as the character stands to the other ("Mother of Lena"). A click on a relationship selects it in the picture. Create Relationship … is here too.
  • A relationship: From, To, Type, Role, Reciprocal Role, From Scene, Until Scene, Note, plus Edit … and Delete.
  • A group: Name, Label, Members, Edit …, Delete.
  • Several things: the number of selected characters, relationships and groups. With exactly two characters you can choose Create Relationship …, with at least one Create Group …. Delete Relationships and Groups clears the selection away.

Every function of the relationship map is a command that Search Commands (⌃⌘K) shows with its place: Create Relationship …, Create Group …, Delete Relationship or Group, Arrange Relationship Map, Show All, Zoom In on Relationship Map and Zoom Out of Relationship Map. They work when the Relationships page is open; otherwise it tells you to open the Relationships page first.

Plot: threads, knowledge, development, story rules

Why this helps

Plot is the tool for the world you are narrating. It has four parts, which you choose with the Part of the Plot switch at the top: Threads, Knowledge, Development and Rules.

  • Threads: What does the story set up, and where does it pay it off? A secret, a clue, a promise, a question in the reader's mind.
  • Knowledge: Who knows what from which scene on?
  • Development: How do characters and places change over the course of the story?
  • Rules: What holds in your world, and how long does a journey take?

You record all this, and Goethe Write checks it against your manuscript. The checks report as Notices in the Review, never as errors, always as a question.

You open the tool with Go ▸ Plot. The Rules part is the fourth part of Plot. In a few menus and in the Tools menu it still appears under the name Story Rules; the same thing is meant.

What the boards look like

The first three parts are boards laid out like the Timeline:

  • On the left is the column of names (it stays put when you scroll sideways).
  • To the right, each scene of the manuscript has a column, in the order in which the text is read. Where a chapter begins, its title stands; below each column is the scene number.
  • A circle marks where something begins or is set up. A dot marks where it ends, is paid off, or where someone acts on it. A solid line connects the two, a dashed line shows what is still open.
  • With + in the window bar you add what the part contains: New Thread, New Entry or New Rule. Knowledge has no plus, because knowledge hangs on threads.
  • The footer under the board explains in two lines how to read it.
  • Every change is a step for ⌘Z.

A board needs scenes. If the manuscript has no text yet, it shows a note instead of columns; for threads, with the button New Text.

Threads

A thread is something the story sets up and later pays off. There are five kinds:

KindMeant for
Secretsomething characters hide from one another or from the reader
Cluea hint that later explains something
Promisesomething the story pledges to the reader (Chekhov's gun)
Reader Questiona question the reader asks that is meant to be answered
Factsomething that simply holds from the setup on and needs no payoff

Creating a thread

  1. Choose the Threads part and click + (New Thread). If the board is still empty, the same button is there.
  2. Choose the Type.
  3. Enter a Title ("What Is Set Up?") and, if you like, a Description.
  4. Under Set Up In choose the scene in which the reader first learns of it, and under Paid Off In the scene where it is resolved. As long as that is open, leave Still Open.
  5. Switch on Leave Deliberately Open if the thread is to stay open, for a sequel or an open ending. It is then not considered forgotten.
  6. Click Add.

The board groups threads by kind (Secrets, Clues, Promise, Reader Questions, Facts) and sorts them in the order of their setup. Under the name, in gray, stands the state: for example Still Open, Paid Off, Answered (for a reader question), Not Answered Yet, Deliberately Open, No Setup, Applies from the setup on (for a fact) or Payoff before setup.

Working with the board

  • Click the name: opens the thread for editing.
  • Double-click in a scene: opens that scene's text.
  • Right-click in a scene: switch Set Up Here and Paid Off Here (for a reader question Answered Here) on and off. That sets the thread without opening a sheet. Also Open Scene and Edit Thread….
  • Right-click the name: Edit…, Open Setup, Open Payoff, Leave Deliberately Open (and back with No Longer Deliberately Open) and Delete. When you delete, Goethe Write asks first and tells you what goes with it (for instance the characters' knowledge about the thread). ⌘Z brings it back.

Example: In scene 4 Jonas finds a key with no lock. You create a Clue called "The key" and set Set Up In to scene 4. The circle appears in column 4, and a dashed line runs on across all the scenes. It is only drawn solid once, in scene 31, you choose Paid Off Here where the lock is found. That way no key is left lying in a drawer by accident.

Knowledge

The Knowledge board answers: who knows what from which scene on? It has one block per thread. Under it stands the Reader (who knows from the setup on) and every character of your project.

Prerequisites: there is at least one character, one thread and one scene. If any is missing, the board says so and leads you on (Go to Threads).

To enter knowledge:

  1. Right-click the scene where the character learns it, in that character's row: Learns It Here. A circle then stands there.
  2. Right-click in a later scene: Acts on It Here. A dot stands there.

Or click the character's name. A small sheet opens: Learns It In (a scene, or Not in the Story), below that Acts on It In with the scenes in which she acts on it, and Add Scene…. The cross removes a scene again.

The line runs from the moment the character knows it. Two warnings show at once:

  • Uses It Too Early: the character acts on it in a scene before she learns it. That is a notice in the Review ("Knowledge Too Early").
  • Learns It in No Scene: she acts on it, but no scene records when she learned of it. That is fine if she knew it before the story began. It is only information then.

Example: Your detective names the culprit in chapter 7 but only learns the name in chapter 12. The board shows the dot before the circle, and the Review reports "Knowledge Too Early".

Development

People and places change. Development records what changes from which scene on: "Target: revenge" becomes "Target: forgiveness" from chapter 20, "Condition: intact" becomes "destroyed".

The board has a row for every character and every place. A dot marks a scene with an entry, a flag a Turning Point, a short stroke that the character or place appears in the scene. A click on the name shows the sheet in the Inspector.

Creating an entry

  1. Click + (New Entry). This works once there is at least one character or place and one scene. You can also right-click in a scene of the row and choose New Entry in This Scene…, or on the name New Entry….
  2. Under For choose the character or place.
  3. Choose From Scene.
  4. Enter the Detail ("Goal, residence, condition…") or choose it from the menu beside it. The menu offers the details the sheet already has and common ones such as Goal, Fear, Relationships (for places Condition, Owner, Atmosphere).
  5. Enter the New Value ("e.g. learn the truth") and, if you like, a Note.
  6. Switch on Turning Point if the scene changes direction.
  7. Click Add.

While you do, the sheet tells you what held until then ("Until then: …"). The new value holds from the scene on until a later entry replaces it. If you delete an entry, the earlier value holds again. ⌘Z reverses it.

Right-click an entry in a scene to edit the entry, mark it as a Turning Point or remove the mark, delete the entry, or Open Scene.

The state at a point

When you select a character or place in the board, the Inspector shows three sections:

  • At the Start: the details as they stand on the sheet. They hold until an entry replaces them.
  • Entries: all entries in manuscript order, with "from scene …" and, if set, "Turning Point". Add Entry… creates a new one.
  • State: the details At the End Of a scene of your choice. For comparison you choose With the Beginning or, for multi-volume works, With "Volume 1". What has changed stands with the word "before …".

With several volumes (top-level folders in the manuscript), the Inspector with nothing selected also shows Compare with Volume…: it shows what has changed from volume to volume for which character or place. That helps when volume 3 comes out and you want to check how volume 1 ended.

Tip: A turning point without preparation is a classic weak spot. Goethe Write says "Sudden Turn" when a character has a turning point but neither appears nor has a development entry in the five scenes before it.

Rules

Invented worlds have rules too: in your nineteenth-century mystery there are no cell phones, in your fantasy world magic has a price. Rules records that, and the check finds every passage that breaks them.

The part shows two sections: Rules and Travel Times.

Creating a rule

  1. Choose Plot ▸ Rules and click + (New Rule), or, with an empty list, New Rule….
  2. Enter the Name, for example "No Cell Phones", and, if you like, a Description.
  3. Leave On switched on. The switch takes a rule out of the check without deleting it.
  4. Choose the Type:
    • Must Not Appear: none of the words may stand in the manuscript.
    • Only Together With: where the first word occurs, one of the others must stand in the same scene. The fields are then labeled If, then also and or. Example: If "magic", then also "price".
  5. Enter the words (Another Word adds a field). You write:
    • a Word: it is found as a whole word, in any spelling (capitals or lower case do not matter);
    • a word with *: the asterisk stands for the rest of the word (phone* finds "phones" and "phoned");
    • an expression between slashes (/telefon\w*/) if you know regular expressions. If one is invalid, the sheet tells you.
  6. If the rule should apply to only part of the work, choose Only in These Storylines (they appear as soon as your project has storylines). With no choice, the rule applies to the whole manuscript.
  7. Click Add.

Under the fields the sheet explains in one sentence what the rule does and says how many passages currently violate it. In the list, each rule has a short summary ("Must Not Appear: “cell phone”, “smartphone”").

If something violates a rule, the row One passage violates a rule (or "… passages violate the rules") appears with Show in Review. The passages stand there; Intended silences a notice, for instance if the character mentions the phone on purpose as a "magic device". Right-click a rule: Edit…, Show in Review, Delete.

Travel times

How long does it take to get from place A to place B? You enter it here, and the check compares it with the dates of your scenes.

  1. Under Travel Times click Add Travel Time… (it only exists once you have created at least two places).
  2. Choose From and To: two different places.
  3. Enter the Duration in hours, such as "1.5" or "0.5" for half an hour. It applies in both directions.
  4. Click Add.

The Travel Too Fast check only works if your scenes have dates (Info ▸ When) and a Place. It lines up a character's scenes by date and reports when too little time is left for the stretch between two places. If a scene only has a day and no time of day, it counts the longest gap the day allows, so it is lenient in your favor.

All the plot checks at a glance

The notices appear in the Review (and in the Inspector under Notices for the selected text). With Go to Passage you jump there, with Intended you hide a notice.

NoticeWhen it appears
Knowledge Too EarlyA character acts on something before she learns it (warning), or learns it in no scene (information).
Payoff Before SetupA thread is paid off before it is set up.
No PayoffA thread is set up but not paid off and not deliberately open.
No SetupA thread is paid off but no scene sets it up.
Travel Too FastA character cannot get from A to B in the time (needs dates, places, travel times).
Rule ViolatedA passage breaks a rule that is switched on.
Character Absent LongA character who appears in at least three scenes is missing for more than eight scenes or more than a fifth of the work (the larger value counts), or no longer appears at the end. Information only.
Sudden TurnA turning point where the character neither appears nor develops in the five scenes before. Information only.

Continuity: catching small contradictions

Besides the plot checks, Goethe Write reads your manuscript for contradictions. Every finding is a question, not a verdict. A name in two spellings may be a typo or a nickname. The findings stand as notices in the Review, each with the passages in the text:

  • Name variants: for example "Meyer" or "Mayer"? If there is a suspicion, the program suggests what may be meant. Is an alias missing?
  • Ages: According to the sheet Lena is 34, in one passage in the text she is 43. If time has passed in between, that is fine.
  • Two places at once: The same character appears in two places at the same moment.
  • Jump back in time: A scene is dated earlier than the one before. Flashback?
  • Unknown point of view or place: A scene names someone as point of view or a place that you have not created. Usually a sheet or an alias is missing.
  • Texts without a date: If at least half of the texts have a date for the Timeline, the rest are named.

What breaks when you move or delete something?

When you move scenes in the manuscript or delete one, Goethe Write checks before and after. What no longer fits stands on the left of the status line at the foot of the window, for example: "After moving, 3 passages no longer fit". Rest the pointer on the sentence to see the details. To its right are two verbs:

  • Undo takes the change back.
  • Keep dismisses the message.

For a deletion, the message also shows scenes that depended on the deleted one (for instance a thread it set up). That way you notice at once, not only while revising.

A scene's details in the Inspector

When you select a scene and the fiction tools are on, the Inspector shows the Scene section:

  • Point of View: who narrates. You choose from your characters, or with Custom Name … type a name that is not a character (a narrator without a sheet).
  • Place: where the scene is set. Also from your places or with a custom name.
  • When: when the scene is set (free text such as "Day 3, evening", plus a date for the Timeline).
  • Storylines: which storylines it belongs to.
  • Threads: how many threads it sets up or pays off.
  • More Details: Tension and Conflict (see Analysis).

The checks use these details. Without Place and When, "Travel Too Fast" has nothing to report; without Point of View, the narrator analysis stays empty.

Beats and Beat Board

Why this helps

A beat is one step of the plot. Later it becomes a scene. You plan the story in beats before you write it, or you add beats afterward to check the structure. The Beat Board is the surface for that.

The phase is not named the same in every Type of Work:

Type of WorkName of the phaseWhat it shows
NovelBeatsthe Beat Board
ScreenplayBeatsthe Beat Board
Nonfiction BookOutlinethe manuscript as a table
LawOutlinethe manuscript as a table

So stories are planned in beats on a board; nonfiction books and briefs in an outline as a table.

The Outline (nonfiction book, law)

Here the planning is the table your manuscript already has: titles, status, words and synopses. You see at a glance which chapters are finished, how long they are and what they are about. A double-click on a row opens the text in the manuscript. You also reach the same table with View ▸ Table (⌘3).

Example: You are writing a nonfiction book with twelve chapters. In the outline you set the status of each and write a two-sentence synopsis. The table shows that chapters 5 and 6 are twice as long as all the others. You split one.

The Beat Board (novel, screenplay)

You reach it with the Beats phase in the head of the window, with Tools ▾ ▸ Planning ▸ Beat Board, or as a tab in the bottom panel.

At the top left the board shows the Type of Work and the title of the phase, and on the right the controls: the View switch (Free Canvas or the acts view), on the free canvas the zoom buttons with a percentage, Plot (opens the Plot tool in a window of its own, if it is visible) and Beat (creates a beat).

If the board is empty, it says: "No beat yet. A beat is one step of the plot; later it becomes a scene." with Add Beat. On the Idea page, story projects without beats also have the row Add First Beat: it creates a beat whose title is your logline and whose content is your premise (if nothing stands there yet, it is called "Der Anfang"), and shows the beats.

Creating and editing a beat

  1. Click Beat (or, in an act, the plus: Add a beat to this act).
  2. The sheet Edit Beat opens.
  3. Enter the Title and, in the large field, the Summary.
  4. Set the Act (1 to 20).
  5. If you like, choose a Label. It appears as a dot with its name on the card, not as a bar.
  6. Under Link to Scene choose an existing scene.
  7. Click Done.

You open an existing beat with a double-click on the card or with the button with three dots. Right-click a card: Delete Beat.

Turning a beat into a scene

On every card without a scene there is Create as Scene. One click creates a new text in the manuscript, with the beat's title and its summary as first content, and links the two. After that the card shows the scene's title; a click on it switches to the manuscript and opens the text. Creating it is a single step for ⌘Z.

Two views

  • Free Canvas: The cards lie on a surface with a dot grid. You drag them wherever you like. The positions are saved. The zoom buttons run from 40 to 150 percent in steps of ten.
  • Acts: The beats stand in columns, one per act (at least three: Act 1, Act 2, Act 3). Drag a beat into another column to make it part of another act. Empty columns say "Drag a beat here or add one."

Note on the English interface: The second switch is labeled "Case File" there, because the word belongs to the same label as the case file in legal projects. What is meant is the view by acts of the story, not the legal case file.

Example: You are planning a thriller in three acts. On the free canvas you collect twenty beats as they occur to you. Then you switch to the acts view and see: Act 2 has twelve beats, Act 3 only two. You drag three beats to the back, and the ending holds up.

In a shared project (Goethe Link) the board can only be edited if you may write there.

The tool strip in the head

Beside the phases, the head of the window shows a strip with the Navigator and the tools of your Type of Work, each one click away. A tool can be opened in a window of its own beside the text. For a novel these are Timeline, Analysis, Plot and Relationships; what a phase already shows (the Beat Board in Beats, the Review in Revision) does not stand once more as a button beside it. Tools ▾ names every tool of the project in full, in the groups Planning, Writing, Check and Legal and Research. Manage Tools leads to the switches.

You reach the Overview with ⌘4. It shows progress, what comes next, and what is still waiting in the Review.

Analysis

Why this helps

After writing you want to know: Does the structure hold? Is one chapter much longer than the others? Does one character narrate almost everything although you wanted an ensemble? Does someone vanish for a hundred pages? Analysis answers with four pictures. It is not a measurement of the text but a mirror of what you have recorded about your scenes, supplemented by what the program can count.

Opening Analysis

Analysis is the third part of the Timeline. At the top, the Part of the Timeline switch lets you choose between Narrative Order, Chronology and Analysis. You also reach it with Go ▸ Analysis. The head line of the page reads "Structure, Lengths, and Tension". If the manuscript has no scenes yet, there is a note with the button New Text.

If you click a scene in one of the pictures, the Inspector shows it without your leaving the page; a double-click opens its text.

Tension Arc

Tension is your own judgment from 0 (calm) to 5 (climax), not a measurement. You enter it per scene:

  1. Select the scene.
  2. In the Inspector, in the Scene section, open the More Details page.
  3. Set Tension: "–" for unrated or "1 of 5" to "5 of 5".
  4. If you like, describe the scene's Conflict: who wants what, what stands in the way?

As long as no scene is rated, Analysis says "No Scene Rated Yet"; a click on it shows you the first scene in the Inspector. After that, Analysis draws the Tension Arc as a curve. Under the picture it says for how many scenes you have rated and where the highest point lies.

Example: You rate your mystery. The curve climbs steadily to scene 40 and then falls. It shows no second peak before the finale. You consider where a twist is still missing.

Tension is also a field of the scene. It moves with the scene when you move it, and you can take it back.

Scene Lengths

Each bar is a scene in manuscript order. The dashed line shows the average length. The colors follow the point of view. So you see at a glance whether a scene stands out, and whose it is.

Points of View

Each point of view has a bar: who narrates how much, in words and scenes. Below it is a sentence such as "Lena narrates 62% of the text, in 31 of 50 scenes." The first four points of view have colors of their own, further ones fall under Other Points of View, scenes with no entry under No Point of View. The colors also apply to the scene lengths.

For the picture to show anything, enter the Point of View for every scene (Inspector ▸ Scene). Without entries it says "No Point of View Entered Yet" and where to enter it.

Appearances

Who appears when? Every character with at least three scenes gets a track, and each stroke is an appearance. An appearance counts when the character is the scene's point of view, is linked with it, or her name stands in the text. A tint marks where a character is missing for more than eight scenes. At most the twelve characters with the most scenes are shown. Below that it says who is missing for how long, for example "Jakob is absent for 11 scenes", with the scene where he last appeared and the one where he returns.

The alias helps here too: if a character is named in the text only by nickname, the nickname goes under Other Names on her sheet, otherwise she counts as missing in that scene.

Curves in the Timeline

Under the tracks, the Timeline shows further curves, each twice: Actual (what your scenes give) and Target (the course you want). There are Tension, Mood (from 0 gloomy to 5 cheerful), Story Time, Pace and Presence (how often a character is named in a scene, counted per thousand words). Tension and mood are your own rating and can be changed by dragging the points; pace, story time and presence are calculated. You draw the dashed target line yourself: a click sets a point, dragging changes it, the Delete key removes it. It changes nothing in your work; the distance between actual and target is the information. Every step is one for ⌘Z.

How the tools work together

The tools complement one another. A typical path:

  1. You create your main characters (Entry ▸ New from Template ▸ Character Sheet) and enter role, target and fear.
  2. You draw the relationships between them and gather families or camps in groups.
  3. On the Beat Board you collect the steps of the story and turn the first beats into scenes.
  4. In the Threads part of Plot you record what you set up and when it is paid off. Under Knowledge you enter who learns what when.
  5. While writing, you enter Point of View, Place and When for each scene.
  6. When revising, you look at Analysis and at the Review: Where does it snag, where does the program say "Knowledge Too Early", "Character Absent Long" or "Rule Violated"?

Next comes saving your work: Chapter 15: Saving, versions and backups. How to operate all these tools with VoiceOver and the keyboard is in Chapter 23: Accessibility.