Chapter 5
Writing aids: focus, typewriter, targets
This chapter is about the hours when you are actually writing. Goethe Write comes with a handful of quiet helpers: Focus, which takes away everything except your text; Typewriter, which keeps your line in the middle of the window; Targets, which show how far you have come; rulers and guides for anyone who sets pages precisely; Zoom; and the Second Pane, where a source sits next to your text.
None of these helpers changes your text. They change only what you see and what the app counts for you.
Most switches live in three places, and they are the same everywhere:
| Where | What is there |
|---|---|
| Ribbon, View tab | The groups View, Writing, Guides and Grids, Show, Zoom and Window |
| View menu in the menu bar | The same commands with the same names and shortcuts, plus Outline Guides and Paper |
| Settings… (⌘,), Writing page | Typewriter and Dim, plus what a new project starts with |
Tip: If you know a command's name but not where it lives, press ⌃⌘K (Search Commands). The search finds every command of the ribbon and the menu bar and tells you where it is.
Focus, typewriter, dim
Focus
Focus turns the window into an empty room with your text in it. No border distracts you, nothing blinks, nothing slides around.
Why it helps: You are writing the last scene of your novel. The chapter list on the left, the notes on the right, the status bar at the bottom: all useful, none of it needed right now. In Focus only the page is left.
Turn it on:
- Open the text you want to write. If a tool page such as the Overview is open, Focus takes you back to the first text by itself.
- In the View tab, in the Writing group, click the large Focus button. Or choose View ▸ Focus. Or press ⇧⌘↩.
- The window goes full screen. The sidebar, the inspector, the bottom panel, the toolbar and the status bar disappear. Only the text stays.
What goes quiet in Focus:
- Nothing moves. That is true even if you have not switched on "Reduce Motion" on your Mac.
- No tooltip opens by itself. It would otherwise pop up wherever the pointer happens to rest.
- Controls do not light up when the pointer passes over them.
- The Second Pane is not available in Focus. The command is grey and the pane is not shown.
- Guides are not shown in Focus and cannot be dragged.
- Word Count opens as a sheet with a Done button, because there is no status bar for it to open from.
Inspector and Navigator in Focus. If you do need the Inspector (⌥⌘I) or the Navigator (⌃⌘N) in the middle of Focus, they appear as floating windows beside the text column, never on top of it. If the line you are writing runs into one of these windows, it steps back to a faint trace and lets mouse clicks through. When the line is free again, it returns without any motion. After Focus the window stays detached, as you chose it. View ▸ Dock Format (or Dock Navigator) puts it back into the window.
Turn it off:
- Press Esc while the cursor is in the text. Or press ⇧⌘↩ again. Or choose View ▸ Focus.
- The window leaves full screen and all the bars come back.
Tip: Focus switches to full screen by itself. If you want full screen without Focus, choose View ▸ Enter Full Screen (⌃⌘F). The sidebar and the status bar then stay where they are.
Typewriter
In typewriter mode, the line you are writing stays in the middle of the window. The text scrolls up beneath you, the way the paper moves up in a typewriter. Your eyes never have to drift toward the bottom of the screen.
Why it helps: When you write near the bottom edge of the window, you slowly lean forward without noticing. With the typewriter, the current line stays where your eyes rest anyway. This is especially pleasant for long scenes that you write in one go.
Turn it on:
- In the View tab, Writing group, click Typewriter. Or choose View ▸ Typewriter. There is no keyboard shortcut for it.
- Start writing. With every keystroke the line stays at the same height, a little above the middle of the window.
- To turn it off, click the same button again.
The switch applies to the whole Mac, not to a single project. You will also find it under Settings… ▸ Writing, in the group for writing aids, as Typewriter Mode. Both places switch the same thing. It is not tied to Focus: use it in the normal window or in Focus.
Tip: The typewriter acts when you type or move with the arrow keys. If you click somewhere else with the mouse, the text does not jump.
Dim
Dim works only in Focus. It lightens everything you are not writing right now, so your paragraph stands out and the rest steps back.
Why it helps: You are revising a scene and want to judge each paragraph by itself, without your eye jumping to the next one. Or you are writing freely and do not want to keep reading what stands above.
Set it:
- In the View tab, Writing group, open the Dim menu. Or choose View ▸ Dim.
- Choose Paragraph: in Focus, only the paragraph you are writing in stays bright. The rest of the text turns light grey.
- Choose Off: in Focus, all paragraphs are equally bright.
Behind the menu are the two commands Dim Paragraph and Dim Off. You can also find them with Search Commands.
There is more choice in the Settings. On the Writing page, in the group for writing aids, you choose what stays bright in Focus:
| Choice | What stays bright |
|---|---|
| Paragraph | the paragraph with the cursor (this is how everything starts) |
| Sentence | only the sentence you are writing in |
| Line | only the line you are writing in |
| Off | everything; nothing is dimmed |
The ribbon and the Settings set the same value. The choice you made last applies.
Dimming is purely a screen aid. Neither printing nor PDF nor Word nor the file itself changes.
Tip: For revising sentence by sentence, choose Sentence in the Settings. You then read only what you are checking right now, and you notice sooner where a sentence stumbles.
Always Dark Timeline
This command is in the View menu (Always Dark Timeline). It keeps the timeline dark even when the window is light. The timeline then looks like a dark island in a light window.
- The switch is remembered per project, not for the whole Mac.
- As long as you have not chosen, the timeline is dark. A project you do not touch stays as it is.
- The command is also in the timeline's own column header (Timeline ▸ Column Header).
More about the timeline in Chapter 8.
Full screen
View ▸ Enter Full Screen (⌃⌘F) is the Mac's own command for filling the whole screen with the window. It is independent of Focus. Focus does switch it on by itself, though, and off again when you leave Focus.
Daily target, targets and word count
Numbers can motivate or press. That is why Goethe Write counts only what you allow it to count. Without targets everything runs quietly: the app still counts what you write today, and shows it only where you go looking.
Where everything is
All the targets of a project live in one place: Project ▸ Targets …. The sheet has five parts:
| Part | What it is for |
|---|---|
| Manuscript | How long the work should be (or may be at most) |
| Deadline | When it should be finished, and on which weekdays you write |
| Daily Target | How many words you set yourself per day |
| Session | How many words you want in this round of work |
| History | What you wrote in the last four weeks |
You can also open the sheet from the Overview by clicking the Today row.
Click Done to apply all changes in one step. ⌘Z takes them back as a whole (the step is called "Change Targets").
The manuscript target
- Choose Project ▸ Targets ….
- Under Scope, enter a number, for example
80,000. - Under Unit, choose Words or Characters.
- Under Type, choose at least or at most.
- Switch on Including Footnotes if the text of the footnotes should count too.
- Click Done.
Below, the sheet shows where you stand ("Now 41,230 words"). Research, characters and places never count, only the manuscript.
If you leave Scope empty, the manuscript has no target. A limit is a target too: at most 25,000 characters means you will later see how much room is left, or by how much you are over.
Examples from writing practice:
- A novel with at least 80,000 words, because the publisher expects that length.
- A term paper with at most 25,000 characters, including spaces and footnotes. The app knows exactly this kind of limit.
You can set the same target in the Inspector when the manuscript is selected (the Target page, with the fields Scope, Unit, Type and Including Footnotes). It is always the same target.
Deadline and writing days
With a deadline, Goethe works out how many words you need to write on each writing day.
- In Project ▸ Targets …, switch on Deadline.
- Under Day, choose the date.
- Under Writing days, tap the letters of the weekdays on which you write. A filled circle means: this is a writing day. Choose at least one.
- The sentence below the block tells you at once what follows, for example: "10,000 words are missing, spread over 10 writing days: 1,000 words a day."
How the app calculates:
- The writing days are counted from today up to and including the deadline. If the deadline falls on a writing day, it counts.
- Missing words = target minus the size of the manuscript at the start of today. That is why the quota holds all day and is worked out again only tomorrow. It does not shrink while you write.
- The result is rounded up.
- If today is not a writing day, you see "Today is not a writing day."
- If the deadline has passed, you see "The deadline has passed. … are still missing." and everything that is missing stays on display.
- If the target is reached, you see "The target is reached."
Important: The calculation needs a manuscript target of at least so many words. With a limit in characters or an "at most", the app cannot work out a quota and says so: "For a daily quota the manuscript needs a target of at least so many words."
The daily target
For the Daily Target you have three options:
| Choice | Meaning |
|---|---|
| None | No target. The app still counts what you write today. |
| Own number | A fixed number of Words per Day (50 to 20,000, in steps of 250) |
| Daily quota from the deadline | The number that follows from the deadline. This choice exists only when a deadline is set. |
What "today" means: The app counts how much the manuscript has grown today. If you delete more than you write, the day counts as zero. Cutting never puts you in the red.
Below the block you always see: "Today so far 640 words."
Example: You are writing a novel and want one scene of about 750 words every day. Choose Own number, enter 750, click Done. From now on the status bar says "Today 214 / 750".
Tip: New projects can start with a daily target. You set it under Settings… ▸ Writing ▸ New Projects: Daily Target, in steps of 250 words. 0 means no daily target.
The session
A session begins when you open the project. It counts the words since that moment. It is not saved: when you close the project, it is over.
- In Project ▸ Targets …, switch on Session target.
- Under Words, enter a number (50 to 20,000, in steps of 100).
- Under So far, you see how many words are already written.
- Start Over starts the session anew right now and counts from here. That is handy after lunch, when you begin a second round.
The session target appears in the status bar ("Session 120 / 500") and in the Overview.
The history
History shows the last four weeks:
- A bar chart, one bar per day. Today is in ink, the other days in grey. Days without words are only a fine line. A thin line marks your daily target.
- If you move the pointer over a bar, a hint names the day and the words, for example "Thursday, 12 November: 640 words".
- Below, four rows: Writing days (for example "19 of 28"), Average (words on a day when you wrote), Best day and Days in a row.
Days in a row counts the days in a row on which you wrote. Today counts as soon as you have written. If you have not written anything today yet, the streak counts up to yesterday. That way the series does not break while you are still sitting down at your desk.
The target of a single text
Every text and every folder can also have a target of its own in words, for example a chapter of 3,500 words.
- Select the text or folder in the sidebar.
- Open the Inspector (⌥⌘I) and its Target page.
- Under Words, enter the target, for example
1,500. - Below, you see Now and a sentence such as "340 words to go." or "Target reached."
- Remove Target takes the target away again.
Where the progress of this target shows:
- In the sidebar, as a small ring (12 points) beside the color dot, filling clockwise. When the target is reached it is completely filled. A hint names "312 of 1,500 words" or "Target reached: 1,520 words".
- In the text's status bar: "312 words · target 1,500", and once reached "1,520 words · target reached".
- In the Table, in the Target column: "50% of 1,500", and when reached "✓ 1,500". The Characters column counts characters with spaces, just as Word Count counts them.
Word Count
Word Count gives you all the numbers of a text at once.
Open it:
- In the Review tab, Check group, choose Word Count …. The Review menu has the same command.
- Or click the word count in the status bar below the text.
- A window opens at the status bar. In Focus, where there is no status bar, the same thing opens as a sheet with Done.
Choose the scope. At the top you choose what is counted:
| Scope | What is counted |
|---|---|
| Selection | the selected passage (only when something is selected) |
| Text | the text the cursor is in |
| Folder | all texts in this text's folder |
| Full Text | all texts that the folder shows as one text |
| Manuscript | the whole manuscript, as the export typesets it |
Selection, Folder and Full Text appear only where they make sense.
The rows of the window:
| Row | Meaning |
|---|---|
| Pages | For a text "about 2.4", estimated in the export's text area. For the manuscript and in the Pages view, the real number, as in the PDF export or the view. |
| Words | the words as the status bar counts them |
| Characters with Spaces | all characters except line breaks |
| Characters Without Spaces | the same without spaces |
| Paragraphs | paragraphs with words in them |
| Rows | lines as they are set in the column |
| Footnotes | the number of footnotes |
If the text has footnotes, you can switch on Count Footnote Text. The switch remembers your choice on this Mac. That matters when a seminar asks for "characters including spaces and footnotes".
Struck-out text (tracked deletions) and bullet markers never count.
For the manuscript, the window first says "Typesetting…". It sets the manuscript as the export does, and for a book that takes a moment.
At the bottom of the window:
- Today: "640 of 750 words", or just "640 words" if you have no daily target.
- Manuscript Target, if one is set: "1,240 characters left" for a limit, "312 characters over" when you are past it, "3,400 words to go" for a minimum, and "reached" once you have made it. The sentence below names the target ("At most 25,000 characters with spaces and footnotes; change under Project ▸ Targets…").
The status bar
The status bar is the narrow strip below the text. On the left it shows where you are, and on the right only what currently applies:
| Place | Content |
|---|---|
| Left | "Page 3 of 12 · 67 words". With a selection: "12 of 67 words". A click on the words opens Word Count. For a text with a target: "312 words · target 1,500". |
| Right, Today and Session | "Today 214 / 750 · Session 120 / 500", only when a daily or session target exists |
| Right, changes | "Changes Are Being Tracked", in your color. A click turns it off. |
| Right, revision | the open revision round, for example "Revision 2" |
| Right, Jobs | long jobs in the background (for example PDFs per recipient) |
| Right, Not Saved | appears only when saving has failed |
| Far right | Draft ▾ or Pages ▾ and the zoom level, for example 100% ▾ |
The numbers change only a second and a half after your last keystroke. That way nothing moves while you type except your cursor.
If "about" stands before the page number, the pages are estimated, not counted from the finished typesetting.
The Overview
The Overview is your project's reading page. Its Progress section shows:
- the manuscript with its word count and a bar: how many texts are already Done,
- below, the number of texts for each status,
- Today: "214 of 750". A click opens Project ▸ Targets … (the hint says "Set Daily Target" or "Change Targets"),
- Session, if you have set a session target,
- Deadline: "18 days to go", "tomorrow", "today" or "over",
- Manuscript Target with a bar, for example "41,230 of 80,000 words" or "1,240 characters left".
The sections Up Next (your unfinished texts in manuscript order) and For Review (open notices of the Review) stand beside it. More about the Review is in Chapter 11.
Words in the analysis
The Analysis in the timeline shows words by scene (Scene Lengths) and by point of view (Perspectives) as charts. That answers a different question than the targets: not "how much" but "where". More in Chapter 8.
Tip: Start small. A daily target you reach on five days out of seven helps more than a big one you ignore. After two weeks the History shows you how much you realistically write.
Guides, ruler, marks, paper
Guides and rulers are for authors who set pages precisely: a cover text, a dedication, a poem, a screenplay page with fixed margins. If you only write text, you can skip this part.
Where to find them
View ▸ Guides and Grids, and in the View tab the Guides and Grids group:
| Command (menu) | Ribbon button | Shortcut |
|---|---|---|
| Rulers | Rulers | ⌘R |
| Guides | Guides | ⇧⌘R |
| Freeze Guides | Lock | ⌃⇧⌘R |
| Set Guide ▸ New Guide … | New | – |
| Set Guide ▸ Center of Text Area | Middle | – |
| Select All Guides | Select All | – |
| Clear All Guides | Clear All | – |
Next to it, the View menu holds Invisibles (⇧⌘8), Marks, Clean View (⌃⌘H), Outline Guides and Paper.
The ruler
Rulers shows the rulers with indents and tab stops.
- Choose View ▸ Guides and Grids ▸ Rulers or press ⌘R.
- The ruler appears along the top edge. In the page view (Pages), a vertical ruler joins it on the left.
- A click in the ruler sets a tab stop. You move the indents by their handles.
Adjust the ruler. In the page view, right-click the ruler:
| Entry | Effect |
|---|---|
| Unit of Measure | Millimeters, Centimeters, Inches, Points, Pica or Cicero |
| Origin | Where zero lies: at the Text Area, the Sheet or the Spine |
| Reset Origin | Zero goes back to the text area |
| Lock Origin | Zero can no longer be moved by accident |
| Show Left Ruler | switches the vertical ruler on or off |
| New Guide … and Guides and Grids | the same commands as in the menu |
The Unit of Measure is the same as in Page Setup (Chapter 13) and under Settings… ▸ General. If you think in inches, set it once and all measures follow.
Move the zero point. Drag in the corner where the two rulers meet onto the sheet. Zero follows the pointer and snaps. Double-click the corner to reset it to the text area. The ruler remembers its settings for each project on this Mac.
Guides
A guide is a fine line on the sheet that you align things to: the middle, the beginning of a verse, the distance of a heading.
Good to know first:
- Guides show in the page view (View tab, Pages, or ⌥⌘P). In the Draft and in Focus they are not shown.
- They are an on-screen aid. They do not appear in print, in PDF or in Word.
- They belong to the project. They live in a file of their own in the project package and travel with the project. Whether you currently see them or have frozen them belongs to this Mac instead.
- Up to 200 guides are allowed per scope, and up to 2,000 in a project.
Drag out a guide:
- Switch on the page view and the rulers.
- Drag down from the top ruler onto the sheet: a horizontal guide appears. Drag to the right from the left ruler: a vertical one appears.
- Let go at the place you want. While you drag, and when a guide is selected, the status bar names the distance and what the guide snaps to.
Set a guide by number:
- Choose View ▸ Guides and Grids ▸ Set Guide ▸ New Guide …
- Choose the Direction: Horizontal or Vertical.
- Enter the Position. You can type a number in the chosen unit, also with a unit of its own (for example
12 mm), a percentage (50 %) or the wordmiddle. - Choose Measured from: Sheet or Text Area.
- Choose the Edge it is measured from. For a horizontal guide these are Top, Bottom and Middle; for a vertical one Inside, Outside, Left, Right and Middle.
- Under Applies to, choose All pages, Left pages or Right pages.
- Switch on Mirror in book if the guide should stand mirrored on left and right pages (with mirrored margins, see Chapter 13).
- The last switch protects this one guide against changes. In the English interface it is currently labeled Hidden; it is the lock of the single guide.
- Click Add.
The command Center of Text Area sets a guide in the middle of the text area with one click.
Change or remove a guide:
- Each guide has a small flag at the ruler. Click it to select the guide. Hold ⇧ to add more.
- Double-click the flag to open the Guide sheet with all the fields.
- The arrow keys move the selected guide by one step of the unit. With ⇧ the step is larger, with ⌥ finer.
- ⌫ deletes the selected guide.
- Esc clears the selection.
- In the Format palette, a selected guide gets a Guide section with the same fields and the buttons Apply and Delete guide. Another section lists all the guides of the text ("No guides yet." as long as there are none).
- Select All Guides selects all visible ones, Clear All Guides deletes all in one step. ⌘Z brings them back.
Keys while dragging:
| Key | Effect while dragging |
|---|---|
| ⌥ | Dragged out of the top ruler, you get a vertical guide (and the other way round). When you move an existing guide, you make a copy. |
| ⇧ | The guide snaps to the ruler's tick marks. |
| ⌘ | Snapping is off. |
| ⌥⌘ | Grabs a guide even in the middle of the text. |
| Esc | Cancels the drag. |
Snapping. Without a key, a guide snaps near the sheet edge, sheet center, text area edge, text area center, spine edge and other guides. The status bar tells you what to, for example: "Snapped to the text area edge."
Freezing. With Freeze Guides (⌃⇧⌘R) nothing slips any more. To protect a single guide, use the lock in that guide's sheet. If a guide is frozen, the app says: "The guide is locked. Unlock it before making changes."
Show and hide guides. Guides (⇧⌘R) hides or shows them without deleting them. The state applies to this window and this Mac.
Tip: A poetry collection with a fixed indent for every verse line? Drag out a vertical guide, align the verses to it, then hide the guide. The text stays as it is; the guide was only your ruler.
Coming soon: The plan for this area includes further aids that the program does not have yet: a baseline grid and a document grid, a Measure tool, and typesetting hints that check the page setting. Once they are there, they will appear in the Guides and Grids group.
Clean View
Clean View (⌃⌘H, the command "Hide all aids") is for the moment when you want to see the sheet entirely unobstructed, without switching things off one by one.
- Press ⌃⌘H or choose View ▸ Clean View.
- In this window the app hides the rulers, guides, invisibles and spell checking while typing. The status bar says Aids Hidden.
- Press ⌃⌘H again. Everything comes back as it was before.
The command changes nothing in the document and nothing in the settings. It applies only to this window. While the aids are off, the individual switches are blocked and say "Aids Hidden".
Invisibles
Invisibles (⇧⌘8) shows the paragraph marks, spaces and other control characters in the text. The command is in the Show group and in the View menu.
That helps when a paragraph does not behave the way you think: is there a double space, a hard line break, an empty paragraph? With the characters visible, you see it.
Marks
The text carries signs for things you and others have done to it. In View ▸ Marks (in the ribbon: Marks in the Show group) you switch each kind on or off:
| Mark | What it looks like |
|---|---|
| Comments | tinted in the person's color, with a speech bubble in the margin; clicking it opens the conversation |
| Changes | insertions underlined, deletions struck through, in the color of the person who made the change |
| Evidence | finely underlined in ink; a seal in the margin means not checked yet |
| Statutes | dotted underline; ⌘-click opens the provision |
| Marks (the fifth entry, the role bars of legal projects) | a bar in the left margin: own submission, other side, undisputed, evidence, or assessment |
Only the kinds that belong to your project are offered: Comments and Changes always; Evidence and Statutes in projects with the tools for law or science (statutes also with consulting); the role bars only with law.
Important: you hide only the display. Comments, changes and everything else stay in the project. The choice applies to this Mac and all projects. All kinds are on at the start.
Example: You want to read the text without the red of an editing round, without accepting any changes. Switch Changes off, read, switch them on again.
Outline Guides
View ▸ Outline Guides shows fine lines in the sidebar, in the table and in the Navigator's contents. They make visible what belongs to which folder: a chapter with twelve scenes looks much clearer. The switch applies to this Mac.
Paper
View ▸ Paper ▸ Light · Dimmed · Dark decides how the sheet looks in the dark appearance. The same choice exists under Settings… ▸ General ▸ Appearance, where the entry is called Paper.
| Paper | What it looks like |
|---|---|
| Light | a warm, light white (this is how the app starts) |
| Dimmed | a calm grey-beige that glares less |
| Dark | a dark ground with light type |
The rules:
- The Paper choice exists only in the dark appearance. In the light appearance the sheet is always light, and the entries are grey.
- You set the Appearance of the whole app under Settings… ▸ General: Dark (how the app starts), Light or Same as Mac.
- Paper is purely a screen matter. Printing, PDF and Word stay as they are.
Tip: If you write in the evening, try Dimmed. The sheet remains paper but glares less.
Zoom and split view
Zoom
Zoom makes text and sheet larger or smaller. It is remembered per project: each project opens with the zoom you used last. Zoom ranges from 25% to 500%.
In the ribbon. View tab, Zoom group:
| Command | Effect | Shortcut |
|---|---|---|
| Zoom Level (menu) | Fit to Window, then 25%, 50%, 75%, 100%, 125%, 150%, 200%, 300%, 400%, 500% | – |
| Zoom In | one step larger | ⌘+ |
| Zoom Out | one step smaller | ⌘− |
| Actual Size | 100% | ⌘0 |
| Page Width | the sheet as wide as the pane (switches to Pages) | – |
| Whole Page | one whole sheet in the pane (switches to Pages) | – |
The View ▸ Zoom menu has the same entries.
Fit to Window lets the type grow with the window in steps, so the number of characters per line stays the same. If you choose a fixed step, "Fit to Window" is off for this project until you choose it again.
In the status bar. At the far right stands the zoom level, for example 100% ▾. Its menu has Fit to Window, 100% (Actual Size), all the steps, and depending on the view:
- In the Pages view: Page Width and Whole Page.
- In the Draft: the Line Width Narrow, Medium, Wide.
With the trackpad:
- Spreading or pinching two fingers zooms in and out around the spot under the pointer.
- Holding ⌘ and scrolling zooms too.
- A two-finger double tap switches between Fit to Window and 100%.
When you zoom with two fingers, the zoom pauses briefly at 100% and where the sheet is as wide as the pane. On the trackpad you feel a light click. The text is redrawn at every size, never as an enlarged picture.
Line width in the Draft. In the Draft, the text stands in a calm column. Line Width (View tab, View group) chooses Narrow, Medium or Wide. That is about 30, 34 and 38 ems of the body type. What width a new project gets, you set under Settings… ▸ Writing ▸ New Projects.
Draft, Pages, Two Pages. The View group also holds:
- Draft (⌥⌘E): a calm column for writing.
- Pages (⌥⌘P): sheets in the paper size, with footnotes at the bottom of the page. How the page looks, you set in Page Setup: Chapter 13.
- Two Pages: two pages side by side as soon as they fit in the window.
The Settings… ▸ Writing ▸ New Projects decide which view, line width, zoom and daily target a new project gets. After that, each project remembers its own choice.
The Second Pane
The Second Pane puts something next to your text: a second text, a PDF, an image or a source.
Why it helps: You are writing a chapter and need a PDF from your research. Or you are comparing two scenes and want to see both. Or you are writing a legal opinion and have the source beside you.
Open it:
- In the View tab, Window group, choose Second Pane. Or choose View ▸ Show Second Pane. Or press ⌥⌘↩.
- The pane opens to the right of the text, half as wide as the room. It shows what suggests itself: beside a text, the document you used last or the first PDF of the research; beside a document, the text you used last.
- To close it, press ⌥⌘↩ again, choose View ▸ Hide Second Pane, or click the × in the pane's head.
The second pane takes the place of the Inspector. While it is open, the Inspector is closed. If you call up the Inspector, the second pane closes. In Focus it does not exist.
The pane's head. From left to right:
| Element | What it does |
|---|---|
| ‹ › | Back and Forward in the Second Pane |
| Title ▾ | A menu of what is shown here: Choose Text or Document. The ones used last come first. |
| Put Below the Text / Put Right of the Text | Puts the pane below the text instead of beside it, and back. The last choice holds for the next window. |
| Sync | Two texts scroll together. Only where two texts are showing. |
| ⋯ | Swap Sides (the pane shows what stood on the left, and the other way round), Open on the Left (shows the pane's entry in the main pane), and for files Open with Another App |
| × | Close (⌥⌘↩) |
Change the size. Drag the fine line between the text and the pane. The pane is never narrower than 360 points, and at least 360 points always stay beside it for the text. When it sits below the text, the minimum height is 200 points.
What the pane can show:
- Texts you write there as in the main window.
- PDFs open in the research reader (search, highlight, take quotes).
- Images and files show in a preview. A web address opens in the browser.
- Folders show their entries to choose from.
Other places in the app use it too: sources and evidence from Arguments and the Case File open there, as do the findings of Check Paragraph. The text you are checking stays in view.
Open Alongside. The Entry menu has Open Alongside: the selected entry appears in the second pane.
Scroll in Sync
Scroll in Sync (View tab, Window group) lets two texts side by side run together. They run proportionally: if you are a third of the way through one text, the other stands at a third too.
- Open two texts side by side (main pane and second pane).
- Switch on Scroll in Sync, or click Sync in the second pane's head.
- Click again to switch it off. The second pane then scrolls on its own.
If no second pane is open yet, the app remembers the switch: "Applies as soon as a second pane is open."
Example: You are translating or cutting a scene and have the old version on the right. Both run at the same pace, and you see at once where you cut.
Open in New Window
Open in New Window (View tab, Window group, and the Entry menu) opens the selected text in a window of its own. You can drag it to a second screen.
- Select the text in the sidebar. Without a selection the command is grey: "Choose on the left what should appear in a new window."
- Choose Open in New Window.
- The window appears near the main window. If the text is already open in a window of its own, that window comes to the front.
Arrangement
Arrangement (View tab, Window group, menu View ▸ Arrangement) sets up the window for one kind of work with a click:
| Arrangement | Shortcut | What it does |
|---|---|---|
| Writing | ⌃⌘1 | Inspector closed, sidebar on, Draft, text |
| Research | ⌃⌘2 | the research in the second pane beside the text, sidebar on, Draft |
| Correction | ⌃⌘3 | Inspector open on Notes, sidebar away, Pages, text |
Tip: Correction is the window for the last pass: the sheet stands in its paper size, the notes beside it, and the sidebar does not distract you.
Next: Chapter 13: Page setup, design, printing · Chapter 21: Keyboard shortcuts